Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Hatton, Cheshire West and Chester
Full bath re-enamelling and resurfacing in Hatton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- Chips and rust in more than one place
Bath re-enamelling in Hatton without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Our repair technicians work on Victorian roll-tops, acrylic baths and pressed steel baths, and the jobs we see most are chips and rust in more than one place and a roll-top that’s seen better days.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Hatton (CH3)
- County
- Cheshire West and Chester
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What else we do in Hatton
Repairing versus replacing in Hatton
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why Hatton clients choose us
- We will tell you if it’s not worth repairing
- Colour-matched on site
- Same prices wherever you are
- A year’s guarantee on all work
Take a look at our prices page and resurfacing vs replacement cost guide.
Prices and what affects them
Prices start from £350. We charge the same across the UK, including Hatton. What changes the price is:
- Access to the area
- The material and finish
- How many areas need work
- How many items we do on one visit
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
How to get a fixed quote
Phone photos are fine. Ensure they show:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- A photo taken from further back
- Any earlier repairs or coatings
The quickest way to a price is to send two or three photos using our quote form or call us. We will tell you honestly whether it can be repaired.
Your questions about bath re-enamelling in Hatton
How do I get a price for bath re-enamelling in Hatton?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a photo of the whole item and your postcode.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
When a repair isn’t the answer
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
What we do, step by step
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Plan for most of the day. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
- Make sure the room can be ventilated
Get a quote
Send us photos of the damage and one of the entire item, and tell us you’re in Hatton, and we’ll reply with a fixed quote.
Advice
Where we work around Hatton
Hatton is about 5 miles south-east of Hoole, in Cheshire West and Chester. Our technicians come to homes and businesses in Hatton and nearby villages, so nothing has to leave your home. Our technicians cover 224 places across Cheshire West and Chester. Our jobs stretch from Hatton to Liverpool (19 miles away).
Postcode districts we cover here: CH3. Other places close to Hatton include Gatesheath (1 mile east), Hargrave (1 mile north-east), Tattenhall (2 miles south-east), Handley (2 miles south) and Newton-by-Tattenhall (2 miles east). Within a short drive, we also cover Chester (5 miles north-west), Ellesmere Port (11 miles north-west), Winsford (12 miles east), Northwich (14 miles north-east), Neston (15 miles north-west) and Boughton (5 miles north-west).
Near you in Hatton
A little further out are Tarporley War Memorial Hospital (5.6 miles east) and Museum of Amusements (1.8 miles south-east). For a walk, there is Bickerton Hill and Hockenhull Platts.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
