South Ayrshire · Scotland
Bath re-enamelling & resurfacing in Hayhill, South Ayrshire
Full bath re-enamelling and resurfacing at your home in Hayhill, with a one-year guarantee on every repair.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- An outdated colour you’d like to change
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Hayhill. The price reflects:
- How easy the damage is to reach
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- The material and finish
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- Where you are, by postcode
- A wider photo showing the whole bath
- What it’s made of, if you know
- A close-up of the damage, in focus
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
About our bath re-enamelling in Hayhill
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Our repair technicians work on acrylic baths, cast iron baths and pressed steel baths, and common reasons people get in touch are an outdated colour you’d like to change and a bath that stays dull however much you clean it.
All our work is covered by a one-year guarantee.
- Area
- Hayhill (KA6)
- Region
- South Ayrshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
Once the work has cured, treat it gently:
- Use washing-up liquid and a soft cloth
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
- Don’t leave a chip unrepaired
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
What we do, step by step
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
- Let us know which floor the room is on
Ask for a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Related advice
Common problems we fix in Hayhill
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
It’s worth getting a quote if you see:
- A coating lifting around the plughole
- Wear marks under the taps
- A dull, rough surface that will not come clean
- An original cast iron bath that needs restoring
What to look for in a quote
- The length of the guarantee and what it covers
- Who will actually do the work
- How soon you can use it again
- How to care for the finish
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
FAQs for Hayhill
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we’ll plan for it.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
What areas do you cover?
Everywhere in the UK, Hayhill included. There is no extra charge for travel.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Hayhill and the surrounding area
Hayhill is about 8 miles east of Ayr, in South Ayrshire. Jobs in Hayhill are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Hayhill is one of 52 towns and villages in South Ayrshire where we work. We work right across the region, from Hayhill to Glasgow (about 31 miles away).
Our visits in KA6 work the same way as everywhere else we cover. We also travel to Sinclairston (1 mile north-east), Rankinston (1 mile south-west), Drongan (2 miles north-west), Millmannoch (2 miles north-west) and Coalhall (3 miles north-west). We also work in nearby towns such as Ayr (8 miles west), Troon (13 miles north-west), Prestwick (9 miles north-west), Heathfield (8 miles north-west), Belmont (8 miles west) and Forehill (7 miles west).
What’s near Hayhill
A little further out are Drongan Castle (1.2 miles north-west). Green spaces nearby include Belston Loch.
Repairing versus replacing in Hayhill
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. Compared with replacing, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- One price list for the whole UK
- Straight answers about what a repair can do
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
See our full price list or bath cost comparison.
Nearby places to Hayhill
Also in Hayhill
Landlord and trade work in Hayhill
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
