South Ayrshire · Scotland
Bath re-enamelling & resurfacing in Rankinston, South Ayrshire
Full bath re-enamelling and resurfacing for homes and businesses in Rankinston and across South Ayrshire. Send photos for a free, fixed quote.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Chips and rust in more than one place
Landlord and trade work in Rankinston
If you manage property in Rankinston, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
How we handle bath re-enamelling in Rankinston
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a coloured bath you want in white and staining under the taps and around the waste, we can help, whatever the material.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Rankinston (KA6)
- Area hub
- South Ayrshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Rankinston
Also in Rankinston
Common problems we fix in Rankinston
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
These are the problems we are asked about most:
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
- Stains that will not shift
- Chips and rust in more than one place
Questions to ask before you book
- What protection goes down before work starts
- What prep work is covered
- Whether there are any call-out or travel charges
- How the colour is matched
How the visit works
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. The job generally runs to the best part of a day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Clear the area around the damage
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Advice
Repair or replace: which is better?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the entire surface without moving it. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- CHAS and Constructionline accredited
- No extra charge for your area
- We will tell you if it’s not worth repairing
- Usually one visit, start to finish
See our full price list or resurfacing vs replacement cost guide.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- The material and finish
- The size and number of damaged areas
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from photos
We price nearly every job from photos. This is what we need:
- Any earlier repairs or coatings
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Covering Rankinston
Rankinston is about 8 miles south-east of Ayr, in South Ayrshire. Jobs in Rankinston are booked in like any other job: a fixed quote from photos, then a visit to do the work. Rankinston is one of 52 places in South Ayrshire we cover. Our jobs stretch from Rankinston to Glasgow (about 32 miles away).
Postcode districts we cover here: KA6. That includes homes on Littlemill Place and Coyle Crescent. We also cover the places around Rankinston: Hayhill (1 mile north-east), Sinclairston (2 miles north-east), Drongan (2 miles north), Millmannoch (3 miles north-west) and Coalhall (3 miles north). Further out, we also cover Ayr (8 miles north-west), Troon (13 miles north-west), Prestwick (9 miles north-west), Heathfield (8 miles north-west), Belmont (8 miles north-west) and Forehill (7 miles north-west).
Landmarks near Rankinston
A little further out are Kerse Castle (0.8 miles west) and Dunaskin Open-air Industrial Museum (3.7 miles south). For a walk, there is Kerse Loch.
Questions from Rankinston
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can you price it without visiting?
Usually, yes. Clear photos let us give you a fixed price without visiting.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Rankinston.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Do you come to Rankinston?
Yes. We work across the UK and travel to Rankinston. Send photos and we will quote, or call 0345 017 0787.
Looking after it afterwards
Looking after the surface is easy:
- Rinse off hair dye, oils and bath bombs right away
- Never use suction bath mats
- Store bottles off the bath
- Have chips seen to early
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What a repair cannot fix
We won’t take on work that won’t last, so these are the limits:
- Problems we cannot see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
- A bath that’s rusted through
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
