South Ayrshire · Scotland
Bath Re-enamelling for Millmannoch homes
Full bath re-enamelling and resurfacing in Millmannoch, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- A coating lifting around the plughole
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
About our bath re-enamelling in Millmannoch
Most baths are re-enamelled in a day, and you can use the bath the day after. Nothing is disconnected or removed. We work on pressed steel baths, acrylic baths and cast iron baths, and people most often call us about an original cast iron bath that needs restoring and stains that won’t shift.
All our work comes with our one-year guarantee, wherever you are in South Ayrshire.
- Area
- Millmannoch (KA6)
- Region
- South Ayrshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Millmannoch
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
You may need us if you’ve spotted:
- Brown or grey marks that don’t clean off
- Several chips and rust patches
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
Comparing quotes
- What happens if they find more damage
- How the colour is matched
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Landlord and trade work in Millmannoch
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What we can’t put right
Before booking, it’s worth knowing the limits too:
- A bath that’s rusted through
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
What affects the price in Millmannoch
Resurfacing from £350. There’s no area surcharge for Millmannoch. What changes the price is:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- How hard the colour is to match
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.
How to get a fixed price
Most quotes are done from photos alone. To help us price it:
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- A wider photo showing the entire bath
- Details of any past repairs
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Towns and villages near Millmannoch
Other services in Millmannoch
How it works
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. Allow the best part of a day, and we will tell you if anything changes.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.
Related advice
Where we work around Millmannoch
Millmannoch is about 6 miles east of Ayr, in South Ayrshire. We visit customers in Millmannoch and the surrounding area, so you don’t need to take anything anywhere. Our repair technicians cover 52 places across South Ayrshire. Our nearest city page is Glasgow, about 30 miles away.
Jobs in KA6 are booked in the same way as anywhere else. That includes homes on Byres Road, Pettoch Road and Ailsa Craig View. Close by, we cover Drongan (1 mile east), Hillhead (1 mile north-west), Coalhall (1 mile north-east), Hayhill (2 miles south-east) and Sinclairston (3 miles east). We also work in nearby towns such as Ayr (6 miles west), Troon (10 miles north-west), Prestwick (6 miles north-west), Heathfield (6 miles north-west), Belmont (6 miles west) and Forehill (5 miles west).
Around Millmannoch
Typical jobs here are in homes near Drongan and the streets around them. A little further out are Ailsa Hospital (4.4 miles west) and Drongan Castle (1.2 miles east). Not far away are Lochend Loch.
Millmannoch questions
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Do you come to Millmannoch?
Yes, we do. Repair technicians travel to Millmannoch from across the region, with no extra charge for travel.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Keeping it looking good
So the finish stays in good condition for years:
- Do not leave bottles, razors or sponges standing on the surface
- Fix dripping taps quickly
- Don’t let dyes or oils sit on the finish
- Don’t leave a chip unrepaired
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
