Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Hazelbeach, Pembrokeshire
Full bath re-enamelling and resurfacing for homes and businesses in Hazelbeach and across Pembrokeshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A roll-top that’s seen better days
- Several chips and rust patches
Why repair rather than replace?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Generally one visit, start to finish
- We’ll tell you if it’s not worth repairing
- No need to remove anything
Take a look at our full price list or bath cost comparison.
Bath re-enamelling in Hazelbeach without replacing anything
If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Common call-outs are for chips and rust in more than one place and staining under the taps and around the waste, in basins & shower trays, cast iron baths and acrylic baths.
You get a one-year guarantee, the same in Hazelbeach as everywhere else we work.
- Where
- Hazelbeach (SA73)
- Area hub
- Pembrokeshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair cannot fix
We will not take on work that won’t last, so here’s what a repair cannot put right:
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
- A bath that is rusted through
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
How the visit works
Arrival times are agreed in advance, so you know when to expect us. On site, it takes the best part of a day in most cases. We leave the room clean and you’ll know when it can be used.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Preparing for the visit
- Clear the area around the damage
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
Hazelbeach and nearby
Hazelbeach is about 3 miles east of Milford Haven, in Pembrokeshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Hazelbeach is one of 223 places in Pembrokeshire we cover.
We work across the SA73 postcode area. You will find streets such as Lighthouse Drive, Waterston Road and Newton Road. Other places close to Hazelbeach include Llanstadwell (1 mile east), Mascle Bridge (1 mile north-east), Glenowen (1 mile north-east), Little Honeyborough (1 mile north) and Waterston (1 mile north-west). Further out, we also cover Haverfordwest (7 miles north), Milford Haven (3 miles west), Pembroke (3 miles south-east), The Marsh (7 miles north), Dinbych-y-Pysgod (12 miles east) and The Green (12 miles east).
What’s near Hazelbeach
Around Hazelbeach, we work in homes near Ysgol Harri Tudur/Henry Tudor School, Neyland Primary School and Ferry Inn. For rail, the closest station is Pembroke Dock station, roughly 1.7 miles south-east. Other landmarks nearby include Newton Mount Meadow (1 mile west) and South Pembrokeshire Hospital (1.1 miles south-east). Green spaces nearby include Ferry Wood and Pembroke River lower.
- Other local spots include Pembroke Dock: Llanion (2.1 miles east)
How we price bath re-enamelling
Resurfacing from £350. You will know the full cost before booking. We look at:
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- How many areas need work
- What the surface is made of
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Quotes from your pictures
You can take the photos on your phone. Make sure they show:
- A coin or ruler next to the damage for scale
- Details of any past repairs
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Signs you need bath re-enamelling in Hazelbeach
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
These are the problems we are asked about most:
- Chips and rust in more than one place
- A coating lifting around the plughole
- Wear marks under the taps
- A coloured bath you want in white
Before booking anyone
- What prep work is covered
- How the colour is matched
- Aftercare advice
- When it can be used again
Landlords, agents and businesses in Hazelbeach
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Nearby places to Hazelbeach
More services for Hazelbeach
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Have chips seen to early
- Repair dripping taps early
- Wash away dyes and oils after use
- Avoid suction-cup mats
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Hazelbeach questions
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before and we’ll plan for it.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
About our accreditations · Every repair comes with a one-year guarantee.
