Pembrokeshire · Wales
Bath Re-enamelling in Waterston
We travel to Waterston for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- An outdated colour you’d like to change
- An old resurfacing that is failing
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
We work for landlords, letting agents and housing providers in Waterston as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Bath re-enamelling in Waterston without replacing anything
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. Common call-outs are for a bath in a colour that no longer suits and an old resurfacing that’s failing, in Victorian roll-tops, basins & shower trays and pressed steel baths.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Waterston (SA73)
- County
- Pembrokeshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Waterston
Waterston is about 2 miles east of Milford Haven, in Pembrokeshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 223 towns and villages in Pembrokeshire, from the larger towns to small villages.
Every address in SA73 is covered. Whether you live on Well Road, 5th Street and Green Lane or anywhere nearby, we can come to you. Waterston sits on or near the B4325, which makes travel easy. Nearby, we also work in Scoveston (1 mile north), Little Honeyborough (1 mile east), Hazelbeach (1 mile south-east), Mascle Bridge (1 mile east) and Glenowen (1 mile east). Further out, we also cover Haverfordwest (6 miles north), Pembroke (4 miles south-east), The Marsh (6 miles north), Dinbych-y-Pysgod (12 miles east), The Green (12 miles east) and Green (4 miles south-east).
Landmarks near Waterston
Around Waterston, we work in homes near The Three Crowns pub and Milford Haven School. For rail, the closest station is Milford Haven station, about 2.3 miles west of the centre. A little further out are Pembroke Dock Heritage Centre (2.1 miles south-east) and Pembroke Dock: Llanion (2.8 miles south-east). Not far away are Ferry Wood and Hubberstown Pill.
Signs you need bath re-enamelling in Waterston
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Clients typically contact us about:
- Thin, worn enamel in places
- Lots of chips and rust spots
- A peeling or bubbling previous coating
- A roll-top that is seen better days
Questions to ask before booking
- Whether cleaning and preparation are in the price
- Aftercare advice
- What the guarantee covers, and for how long
- Whether the colour is mixed to match
FAQs for Waterston
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
What areas do you cover?
Across the UK, and that includes Waterston. Our prices are the same everywhere.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
What happens next?
We review the pictures and send a fixed quote with dates.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Do you come to Waterston?
We do. We send a technician to Waterston for every job, and the price is the same as everywhere else.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
How the visit works
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and start once you are happy with the plan. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep children and pets away from the room on the day
- Clear the area around the damage
- Keep a parking space free if you can
Getting a price
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
Nearby places to Waterston
Also in Waterston
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Any earlier repairs that need removing first
- The type of damage
- Where the damage is and how we get to it
- Unusual colours or finishes
Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Details of any past repairs
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- Where you are, by postcode
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What we cannot put right
Before booking, it’s worth knowing the limits:
- A bath that is rusted through
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
If in doubt, send pictures and we’ll say what we think.
What we work on
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Keep toiletries on a shelf rather than in the bath
- Dry the bath after use to stop limescale
- Rinse off hair dye, oils and bath bombs right away
- Repair dripping taps early
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
