Staffordshire · England

Bath Re-enamelling for Hazelslade homes

Local bath re-enamelling for Hazelslade: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • A period or roll-top bath worth keeping
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Hazelslade?

Landlord and trade work in Hazelslade

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

Bath re-enamelling in Hazelslade without replacing anything

Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with several chips and rust patches and a bath in a colour that no longer suits, we can typically put it right, whatever the material.

You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.

Where
Hazelslade (WS12)
Area hub
Staffordshire
Warranty
12 months on all our work
Price
From £350. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Common problems we fix in Hazelslade

In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.

You may need us if you’ve spotted any of these:

  • Staining under the taps and around the waste
  • Enamel that’s lost its shine and feels rough
  • A coating lifting around the plughole
  • A period or roll-top bath worth keeping

Before you book anyone

  • A fixed quote, and whether VAT is included
  • What preparation is included
  • What the guarantee covers, and for how long
  • How to care for the finish

Our hiring checklist

Where we work around Hazelslade

Hazelslade is about 2 miles north-east of Cannock, in Staffordshire. Customers in Hazelslade get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Hazelslade is one of 512 towns and villages in Staffordshire we cover. Our jobs stretch from Hazelslade to Birmingham (17 miles away).

Here we cover the WS12 postcode area. Jobs here include addresses on Jenkinstown Road, Valley Road and Barnfield Way. If you’re just outside Hazelslade, we cover Rawnsley (1 mile south-west), Wimblebury (1 mile south-west), Prospect Village (1 mile south-east), Cannock Wood (1 mile east) and Gentleshaw (2 miles east). Further out, we also cover Stafford (9 miles north-west), Burton upon Trent (15 miles north-east), Tamworth (13 miles south-east), Lichfield (6 miles east), Rugeley (3 miles north) and Burntwood (3 miles south-east).

Local landmarks in Hazelslade

In Hazelslade, that means homes near St Peter's, Hazel Slade Primary Academy and Kingsmead School. Hazelslade’s nearest station is Hednesford station, about 1.5 miles west. Well-known places in the area include Cannock Chase Hospital (3 miles south-west) and Cannock Castle Ring (1.3 miles east). The countryside around Hazelslade includes George's Hayes.

Map of Hazelslade © OpenStreetMap contributors

Hazelslade: your questions answered

What happens if you find more damage?

We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Are there extra charges for Hazelslade?

There is no separate call-out charge. Your fixed quote includes everything.

How long will the bath be out of use?

Typically one day, with the bath ready the next day. Deeply pitted baths may need a second day.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.

What areas do you cover?

We work UK-wide, and that includes Hazelslade. Prices do not change with location.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Hazelslade.

Does someone need to be in?

Someone needs to let us in and show us the job. You do not need to watch us work.

DIY kit or professional repair?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

The process

We turn up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take most of the day, and the room is left clean and tidy.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Tell us about parking, stairs or access
  • Ensure the room can be ventilated

Get a quote

To get a price, send a couple of photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.

Get a free quote

Advice

Materials and what they mean for the repair

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.

Repair or replace in Hazelslade?

Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why book with us

  • CHAS and Constructionline accredited
  • We’ll tell you if it’s not worth repairing
  • Every repair guaranteed for a year
  • Technicians who travel to you, UK-wide

See our prices page or guide to resurfacing and replacement costs.

Prices and what affects them

Prices start from £350. We do not charge extra for travel to Hazelslade. The price comes down to:

  • Doing more than one item at once
  • What kind of damage it is
  • The colour and finish to match
  • Any earlier repairs that need removing first

We charge the same wherever you are, with no extra for Hazelslade. The job itself decides the price: the material, the amount of damage and how many items.

Quotes from your photos

Phone photos are fine, there’s no need for anything special. Just make sure we can see:

  • Any details about the material
  • One picture of the whole bath
  • Where you are, by postcode
  • A clear, close picture of the problem area

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.

Aftercare tips

Once the work has cured, treat it gently:

  • Leave the bath for the full curing time before using it
  • Wipe the bath dry after use in hard water areas
  • A dripping tap should be fixed promptly
  • Wash away dyes and oils after use

Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.