Wiltshire · England
Bath Re-enamelling in Henfords Marsh
We travel to Henfords Marsh for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A roll-top that is seen better days
- Enamel that is lost its shine and feels rough
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes the best part of a day. We clean up when we’re done and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
- Let us know which floor the room is on
Getting a price
Send us photos of the damage and one of the whole item, with your BA12 postcode, and we’ll come back with a fixed quote.
Related advice
How we handle bath re-enamelling in Henfords Marsh
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we don’t cut corners on it. Whether it’s a dull, rough surface that won’t come clean and a coloured bath you want in white, we can help.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Area
- Henfords Marsh (BA12)
- County
- Wiltshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Henfords Marsh
Other services in Henfords Marsh
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- Avoid suction-cup mats
- Repair dripping taps early
- Respect the curing time we give you
- Store bottles off the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Honest limits
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- Leaks from fittings rather than the bath
- A metal bath with a through crack
- A bath that’s rusted through
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Covering Henfords Marsh
Henfords Marsh is about 1 mile south-east of Warminster, in Wiltshire. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. We cover 425 places across Wiltshire, from the larger towns to small villages.
Postcode districts we cover here: BA12. Neighbouring places we cover include Boreham (1 mile north-east), Bishopstrow (1 mile east), Sutton End (1 mile south-west), Crockerton (1 mile south-west) and Longbridge Deverill (2 miles south). Further out, we also cover Trowbridge (9 miles north), Devizes (14 miles north-east), Westbury (5 miles north), Melksham (13 miles north), Bradford-on-Avon (11 miles north) and Paxcroft Mead (9 miles north).
Landmarks near Henfords Marsh
Locally, our jobs take us to homes close to Warminster School, The Bell And Crown Public House and Kingdown School and the streets around them. You’ll also find St John's CofE School (0.6 miles north-east) and Christ Church (0.6 miles north-west). The closest station to Henfords Marsh is Warminster station, about 0.9 miles north. Further afield, we also cover the area around Motte and double ringwork east of Bishopstrow Farm (1.4 miles east) and Warminster Museum (0.8 miles north). Open spaces near Henfords Marsh include Cley Hill and Shearwater.
FAQs for Henfords Marsh
Is there any odour?
Expect a mild smell while we are working, which fades afterwards.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How much does bath re-enamelling cost in Henfords Marsh?
Prices start from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
What happens next?
We review the photos and send a fixed quote and the next dates we have.
When to call us in Henfords Marsh
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Customers usually contact us about:
- Enamel that’s lost its shine and feels rough
- A coating lifting around the plughole
- An outdated colour you’d like to change
- Brown or grey marks that don’t clean off
What to look for in a quote
- What happens if the damage is worse than the pictures show
- The length of the guarantee and what it covers
- Whether a trained technician does the job
- Aftercare advice
Landlords, agents and businesses in Henfords Marsh
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Repairing versus replacing in Henfords Marsh
A replacement frequently means several trades over several days. Re-enamelling is one technician, normally one day, with the bath back in use the following day. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. You’ll see the full price before you book.
Why Henfords Marsh clients choose us
- We will tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
- No extra charge for your area
- Repair technicians who travel to you, UK-wide
See our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
