Somerset · England
Bath Re-enamelling in Henlade
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Henlade. Free, fixed quotes from your photos.
- Resurfacing from £350
- Stains that will not shift
- Lots of chips and rust spots
Bath re-enamelling in Henlade without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we don’t cut corners on it. Typical jobs include lots of chips and rust spots and an outdated colour you’d like to change, across cast iron baths, basins & shower trays and acrylic baths.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Henlade (TA3)
- County
- Somerset
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Henlade. The price reflects:
- Where the damage is and how we get to it
- How much damage there is
- How many items we do on one visit
- What the surface is made of
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Send photos for a quote
When you take your pictures, these tips help us give you a firm price:
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- Where you are, by postcode
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Places near Henlade
What else we do in Henlade
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Keep toiletries on a shelf rather than in the bath
- Don’t let dyes or oils sit on the finish
- Use washing-up liquid and a soft cloth
- Leave the bath for the full curing time before using it
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What a repair cannot fix
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
- A bath that’s rusted through
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Landlord and trade work in Henlade
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
If you manage property in Henlade, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Our work in Henlade
Henlade is about 3 miles east of Taunton, in Somerset. From the centre of Henlade to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Henlade is one of 640 places in Somerset we cover.
All of TA3 is within our area, from the main roads to the quietest streets. Streets in the area include Lipe Lane, Stoke Road and Ivy House Park, and we cover them all. If you are just outside Henlade, we cover Ruishton (1 mile north-west), Thornfalcon (1 mile east), Creech St Michael (1 mile north), Bathpool (2 miles north-west) and Monkton Heathfield (2 miles north-west). Further out, we also cover Taunton (3 miles west), Bridgwater (8 miles north), Chard (10 miles south), Wellington (8 miles west), Street (15 miles north-east) and Crewkerne (14 miles south-east).
Near you in Henlade
Our customers here include homes close to Ruishton Inn, Ruishton Church of England School and Heathfield Community School and the streets around them. The nearest railway station is Taunton station, roughly 2.8 miles west. Well-known places in the area include Somerset Cricket Museum (2.5 miles west) and Orchard Shopping Centre (2.6 miles west). The countryside around Henlade includes Staple Hill.
What we do, step by step
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a full day, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
Getting a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
Henlade: your questions answered
Do you cover the entire of Somerset?
Across the UK, so Henlade is covered. Our prices are the same everywhere.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and you’ll get one combined price.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
Are there extra charges for Henlade?
Travel is included in the price, and we charge the same wherever you are.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Repairing versus replacing in Henlade
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the day after. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why book with us
- We’ll tell you if it’s not worth repairing
- One visit for most repairs
- Technicians who travel to you, UK-wide
- Nothing taken out or refitted
Read our full price list or guide to resurfacing and replacement costs.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
