Conwy · Wales
Bath Re-enamelling for Ty'n-y-groes homes
Problem with your bath in Ty'n-y-groes? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Stains that won’t shift
What we are called out for in Ty'n-y-groes
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Send us a picture if you notice any of these:
- A roll-top that is seen better days
- Chips and rust in more than one place
- Worn patches where water runs and sits
- A coloured bath you want in white
What to look for in a quote
- Whether the price covers travel
- What preparation is included
- When it can be used again
- How your room will be protected
Bath re-enamelling in Ty'n-y-groes, done in place
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We’re frequently asked to fix an original cast iron bath that needs restoring and enamel that’s lost its shine and feels rough, across pressed steel baths, basins & shower trays and cast iron baths.
All our work comes with our one-year guarantee.
- Area
- Ty'n-y-groes (LL32)
- Area hub
- Conwy
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Ty'n-y-groes
Also in Ty'n-y-groes
Why repair rather than replace?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.
Why book with us
- No extra charge for your area
- Colour mixed on the day to match
- Accredited with CHAS, Constructionline and SafeContractor
- Honest advice, even when it means no job
Take a look at our prices page or bath cost comparison.
Where we work around Ty'n-y-groes
Ty'n-y-groes is about 6 miles south-west of Bae Colwyn, in Conwy. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Ty'n-y-groes is one of 75 places in Conwy where we work. Our jobs stretch from Ty'n-y-groes to Liverpool (40 miles away).
We work across the LL32 postcode area. Whether you live on Rowen Road, Trem-y-Coed and Maes Rhun or anywhere nearby, a technician can come to you. Close by, we cover Caerhun (1 mile south), Rowen (1 mile west), Tal-y-cafn (1 mile east), Tal-y-bont (2 miles south) and Henryd (2 miles north). Larger places within reach include Bae Colwyn (6 miles north-east), Llandudno (6 miles north), Old Colwyn (7 miles north-east), Colwyn Bay (7 miles north-east), Abergele (11 miles east) and Colwyn Bay (6 miles north-east).
Around Ty'n-y-groes
Locally, our jobs take us to homes close to St Mary's Church and Red Lion pub and the streets around them. The nearest railway station is Tal-Y-Cafn station, roughly 0.9 miles east. Well-known places in the area include Pen-y-Castell (3.5 miles south) and Conwy Hospital (3.9 miles north). For a walk, there is Conwy RSPB reserve and Bryn Glyn Uchaf.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
How the visit works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and we start. Allow a full day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Let us know about parking or access
- Point us to the nearest place to park
- Let us know if it has been repaired before
Getting a price
Most clients in Ty'n-y-groes get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Questions from Ty'n-y-groes
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Ty'n-y-groes. What changes the price is:
- Whether old repairs or coatings need taking off
- What the surface is made of
- Unusual colours or finishes
- The size and number of damaged areas
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
- Details of any past repairs
- Natural light rather than flash
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
When a repair is not the answer
A repair isn’t right for every job, for example:
- Holes rusted through the metal
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
If in doubt, send photos and we will say what we think before booking.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Landlord and trade work in Ty'n-y-groes
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
