North Lanarkshire · Scotland
Bath Re-enamelling for High Banton homes
Damaged bath in High Banton? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- A coloured bath you want in white
What we can’t put right
We’d rather lose a job than do one that will not last, so these are the limits:
- Leaking taps or wastes (a plumber’s job)
- A bath that is rusted through
- Acrylic that moves when you stand in it
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
About our bath re-enamelling in High Banton
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We work on acrylic baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are a roll-top that’s seen better days and brown or grey marks that don’t clean off.
All of our repairs are guaranteed for twelve months in High Banton and everywhere else. We return to put right any problem with the work.
- Location
- High Banton (G65)
- Area hub
- North Lanarkshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Also near High Banton
What else we do in High Banton
How it works
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes most of the day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
How to get a price
Most clients in High Banton get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
High Banton and the surrounding area
High Banton is about 3 miles north of Cumbernauld, in North Lanarkshire. We visit customers in High Banton and the surrounding area, so there is no workshop to go to. Our technicians cover all 89 towns and villages across North Lanarkshire, from the larger towns to small villages. Our nearest city page is Glasgow, about 14 miles away.
Every address in G65 is covered, from the main roads to the quietest streets. We also travel to Banton (1 mile south), Dullatur (2 miles south), Kilsyth (2 miles south-west), Craigmarloch (3 miles south) and Croy (3 miles south-west). Further out, we also cover Motherwell (14 miles south), Cumbernauld (3 miles south), Coatbridge (10 miles south), Airdrie (9 miles south), Bellshill (12 miles south) and Burnfoot (9 miles south).
What’s near High Banton
Locally, our jobs take us to homes close to Banton Church and the streets around them. The nearest railway station is Croy station, roughly 3 miles south of the centre. A little further out are Antonine Centre (3.5 miles south) and Colzium Museum (1.4 miles south-west). For a walk, there is Myot Hill.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Repairing versus replacing in High Banton
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- Same prices wherever you are
- We come to you, anywhere in the UK
See our pricing and resurfacing vs replacement cost guide.
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- Whether we combine several jobs
We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
Before you send photos, a few simple things make all the difference:
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
FAQs for High Banton
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Do you need bath re-enamelling in High Banton?
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Most people get in touch when they notice something like this:
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
- Wear marks under the taps
- Brown or grey marks that don’t clean off
What your quote should include
- How long it needs to cure
- Whether the colour is mixed to match
- How changes to the job are handled
- Whether the price covers travel
About our accreditations · Every repair comes with a one-year guarantee.
