North Lanarkshire · Scotland
Bath Re-enamelling for Banton homes
We travel to Banton for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Staining under the taps and around the waste
- Chips and rust in more than one place
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Fix dripping taps quickly
- Wash away dyes and oils after use
- Keep toiletries on a shelf rather than in the bath
- Don’t use the bath until it has fully cured
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Bath re-enamelling at your home in Banton
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We regularly repair cast iron baths, Victorian roll-tops and basins & shower trays, and people most frequently call us about brown or grey marks that don’t clean off and a peeling or bubbling previous coating.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Banton (G65)
- Region
- North Lanarkshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Banton
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Landlords, letting agents and housing providers in Banton use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
Ask for a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Advice
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
More services for Banton
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Common problems we fix in Banton
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Send us a photo if you notice any of these:
- Thin, worn enamel in places
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
Questions to ask before booking
- What prep work is covered
- How soon you can use it again
- Whether the price covers travel
- What happens if they find more damage
What we can’t put right
Honesty matters more than a booking, so here’s what a repair won’t do:
- Leaks from fittings rather than the bath
- Problems we can’t see until an old finish comes off
- A metal bath with a through crack
Send us pictures and we will tell you honestly before booking.
Materials we work on in Banton
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Where we work around Banton
Banton is about 3 miles north of Cumbernauld, in North Lanarkshire. We visit homes and businesses in Banton and nearby villages, so nothing has to leave your home. We cover 89 places across North Lanarkshire, from the larger towns to small villages. You can also see our page for Glasgow, about 14 miles away.
Postcode districts we cover here: G65. Whether you live on Main Street, St Margaret's Avenue and Mailings Road or a nearby road, a technician can come to you. Other places close to Banton include High Banton (1 mile north), Dullatur (1 mile south), Kilsyth (2 miles south-west), Craigmarloch (2 miles south) and Croy (3 miles south-west). Larger places within reach include Motherwell (13 miles south), Cumbernauld (3 miles south), Coatbridge (9 miles south), Airdrie (9 miles south), Wishaw (15 miles south) and Bellshill (12 miles south).
Near you in Banton
Our clients here include homes close to Banton Church and the streets around them. The closest station to Banton is Croy station, roughly 2.6 miles south-west. A little further out are Antonine Centre (3 miles south) and Kilsyth Victoria Cottage Hospital (2.7 miles west). The countryside around Banton includes Myot Hill.
Banton questions
Are there extra charges for Banton?
There’s no separate call-out charge. Your fixed quote includes everything.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can a failed resurfacing be redone?
Typically, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Can you quote from photos?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- The material and finish
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- Access to the area
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
It only takes a minute to photograph the damage. Please include:
- A clear, close picture of the problem area
- The material, if you know it
- One picture of the entire bath
- Natural light rather than flash
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
