Bradford · England
Bath Re-enamelling in High Farnhill
Full bath re-enamelling and resurfacing at your home in High Farnhill, with a one-year guarantee on every repair.
- Resurfacing from £350
- Thin, worn enamel in places
- A coloured bath you want in white
About our bath re-enamelling in High Farnhill
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We’re often asked to fix brown or grey marks that don’t clean off and wear marks under the taps, in cast iron baths, acrylic baths and pressed steel baths.
All our work comes with our one-year guarantee, wherever you are in Bradford.
- Where
- High Farnhill (BD20)
- Region
- Bradford
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Repair or replace: which is better?
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why High Farnhill clients choose us
- One price list for the entire UK
- Free fixed quotes from pictures
- Most jobs done in one visit
- Honest advice, even when it means no job
Read our prices page and resurfacing vs replacement cost guide.
Common problems we fix in High Farnhill
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
If you can see any of these, send us a photo:
- A coating lifting around the plughole
- A roll-top that is seen better days
- Stains that will not shift
- Thin, worn enamel in places
What to look for in a quote
- Whether cleaning and preparation are in the price
- How soon you can use it again
- Whether they match the colour on site
- What the guarantee covers, and for how long
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Landlord and trade work in High Farnhill
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes most of the day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Open a window if you can
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
Getting a price
Email us photos of the damage and one of the whole item, and tell us you’re in High Farnhill, and we’ll come back with a fixed quote.
Advice
Nearby places to High Farnhill
More services for High Farnhill
Prices and what affects them
Prices start from £350. There’s no charge for travel to High Farnhill. The price comes down to:
- The material and finish
- Previous DIY repairs that have to come out
- How many areas need work
- The colour and finish to match
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your photos
When you take your photos, a few simple things make all the difference:
- Any earlier repairs or coatings
- Something in shot to show the size
- Your postcode, so we can check dates
- A wider photo showing the whole bath
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
High Farnhill: your questions answered
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What happens once I’ve sent photos?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
How long is the bath unusable?
Most baths are done in a day, ready the following day. We give you timings with the quote.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Covering High Farnhill
High Farnhill is about 3 miles south of Skipton, in Bradford. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. High Farnhill is one of 140 places in Bradford we cover. Our jobs stretch from High Farnhill to Leeds (20 miles away).
Here we cover the BD20 postcode area. Nearby, we also work in Farnhill (1 mile south-east), Kildwick (1 mile south-east), Cross Hills (1 mile south), Low Bradley (1 mile north) and High Bradley (2 miles north). Further out, we also cover Bradford (13 miles south-east), Keighley (5 miles south-east), Bingley (8 miles south-east), Shipley (11 miles south-east), Baildon (10 miles south-east) and Great Horton (13 miles south-east).
Landmarks near High Farnhill
Typical jobs here are in homes near Church of St Andrew, Cononley Community Primary School and The Railway pub. The closest station to High Farnhill is Cononley station, about 0.8 miles west. Other landmarks nearby include Keighley Private Classic Car Museum (0.9 miles south-east) and Skipton Castle (3.5 miles north). Open spaces near High Farnhill include Redcar Tarn.
About our accreditations · Every repair comes with a one-year guarantee.
