Bradford · England
Bath Re-enamelling for Farnhill homes
Local bath re-enamelling for Farnhill: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off
How we handle bath re-enamelling in Farnhill
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. If you’re dealing with several chips and rust patches and a peeling or bubbling previous coating, we can normally put it right, whatever the material.
A one-year guarantee comes as standard.
- Where
- Farnhill (BD20)
- Region
- Bradford
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Farnhill
Resurfacing from £350. There is no charge for travel to Farnhill. The price comes down to:
- The material and finish
- Whether we combine several jobs
- How many areas need work
- What kind of damage it is
Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send photos for a quote
Photographing the damage takes a minute. Try to send:
- One sharp close-up of the damage
- Natural light rather than flash
- Where you are, by postcode
- The material, if you know it
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Nearby places to Farnhill
Also in Farnhill
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Looking after it afterwards
So the finish stays in good condition for years:
- Keep toiletries on a shelf rather than in the bath
- Avoid suction-cup mats
- Respect the curing time we give you
- Wash away dyes and oils after use
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Repair or replace in Farnhill?
A replacement frequently means several trades over several days. Re-enamelling is one technician, usually one day. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
What you get with us
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
- Colours mixed by hand to suit your surface
- A fixed quote before you book
Read our prices page and guide to resurfacing and replacement costs.
Do you need bath re-enamelling in Farnhill?
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Most people contact us after spotting something like this:
- Thin, worn enamel in places
- Staining under the taps and around the waste
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
Before booking anyone
- How changes to the job are handled
- Whether the colour is mixed to match
- Is the price fixed, and does it include VAT?
- How to care for the finish
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We clean up when we are done and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the following day.
Before we arrive
- Let us know which floor the room is on
- Let us know if it has been repaired before
- Clear the area around the damage
How to get a price
If you are in Farnhill and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
When we’d advise against a repair
We’ll always be straight with you, so here’s what a repair can’t fix:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
Farnhill questions
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
How long does re-enamelling take?
One day for most baths, ready the next day. We’ll confirm timings when we quote.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Which areas do you work in?
All of Bradford, and the rest of the UK. Travel is included in the price.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We work for landlords, letting agents and housing providers in Farnhill as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Farnhill and the surrounding area
Farnhill is about 4 miles south of Skipton, in Bradford. We travel to customers in Farnhill and nearby villages, so there is no workshop to go to. Farnhill is one of 140 towns and villages in Bradford where we work. Our nearest city page is Leeds, about 19 miles away.
Our technicians cover all of BD20. That includes homes on Main Street, High Croft Way and Starkey Lane. Nearby, we also work in Kildwick (1 mile south-east), High Farnhill (1 mile north-west), Cross Hills (1 mile south-west), Low Bradley (2 miles north) and Silsden (2 miles east). Larger places within reach include Bradford (12 miles south-east), Keighley (4 miles south-east), Bingley (8 miles south-east), Shipley (10 miles south-east), Baildon (10 miles south-east) and Great Horton (12 miles south-east).
Near you in Farnhill
Locally, our jobs take us to homes close to Glusburn Community Primary School, Church of St Andrew and South Craven School, among other places. The nearest railway station is Cononley station, roughly 1.1 miles north-west. A little further out are Keighley Private Classic Car Museum (0.5 miles south-east) and Airedale General Hospital (1.3 miles south-east). Not far away are Redcar Tarn.
About our accreditations · Every repair comes with a one-year guarantee.
