Somerset · England
Bath re-enamelling & resurfacing in Higher Vexford, Somerset
Bath re-enamelling in and around Higher Vexford: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
About our bath re-enamelling in Higher Vexford
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for wear marks under the taps and an old resurfacing that’s failing, in pressed steel baths, cast iron baths and Victorian roll-tops.
A one-year guarantee comes as standard.
- Area
- Higher Vexford (TA4)
- Region
- Somerset
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Nearby places to Higher Vexford
What else we do in Higher Vexford
Should you replace it?
A replacement often means several trades over several days. Resurfacing takes one technician and generally a day. Prices start from £350. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.
Why us?
- We leave the room as we found it
- Most jobs done in one visit
- Straight answers about what a repair can do
- One-year guarantee on every repair
Take a look at our prices page or bath cost comparison.
Looking after it afterwards
Once the work has cured, treat it gently:
- Repair dripping taps early
- Stick to gentle, non-abrasive cleaners
- Don’t let dyes or oils sit on the finish
- Store bottles off the bath
Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Work for landlords and builders
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
For anyone letting property in or around Higher Vexford, we will quote for several properties at once. Send pictures for each one and we will price them together.
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- How many items we do on one visit
- How much damage there is
- Access to the area
- The material and finish
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
We price nearly every job from pictures. This is what to send:
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll say right away whether it can be repaired.
Honest limits
We won’t take on work that will not last, so these are the limits:
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
The process
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
- Ensure the room can be ventilated
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Read more
Higher Vexford: your questions answered
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Is there a guarantee?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Do you cover Higher Vexford?
We do. Repair technicians travel to Higher Vexford from across the region, with no extra charge for travel.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
Higher Vexford and the surrounding area
Higher Vexford is about 9 miles north of Wellington, in Somerset. We travel to homes and businesses in Higher Vexford and nearby villages, so there is no workshop to go to. Our repair technicians cover 640 places in Somerset, from the larger towns to small villages.
We work across TA4 and the streets around it. If you are just outside Higher Vexford, we cover Preston (1 mile north-west), Stogumber (1 mile north-west), Kingswood (2 miles north), Lawford (2 miles north-east) and Crowcombe Heathfield (2 miles east). Larger places within reach include Taunton (10 miles south-east), Bridgwater (12 miles east), Minehead (11 miles north-west), Burnham-on-Sea (15 miles north-east), Wellington (9 miles south) and Sydenham (13 miles east).
Landmarks near Higher Vexford
Not far away are Wills Neck.
About our accreditations · Every repair comes with a one-year guarantee.
