Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Higher Wincham, Cheshire West and Chester
Bath re-enamelling across Higher Wincham and nearby, normally in one visit.
- Resurfacing from £350
- Stains that will not shift
- Chips and rust in more than one place
How we handle bath re-enamelling in Higher Wincham
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Whether it’s a bath that stays dull however much you clean it and thin, worn enamel in places, we can usually put it right.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Higher Wincham (CW9)
- Area hub
- Cheshire West and Chester
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Higher Wincham
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair will not do:
- A cast iron or steel bath that’s cracked right through
- A bath that’s rusted through
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Higher Wincham and nearby
Higher Wincham is about 3 miles north-east of Northwich, in Cheshire West and Chester. From the centre of Higher Wincham to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Higher Wincham is one of 224 places in Cheshire West and Chester where we work. Our nearest city page is Manchester, about 17 miles away.
Jobs in CW9 are booked in the same way as anywhere else. You will find streets such as Hewitt Grove, Linnards Lane and Shores Green Drive, and we cover them all. Neighbouring places we cover include Pickmere (1 mile north), Wincham (1 mile south-west), Lostock Gralam (1 mile south-east), Marston (1 mile south-west) and Lostock Green (2 miles south). Within a short drive, we also cover Winsford (7 miles south), Northwich (3 miles south-west), Frodsham (10 miles west), Hartford (4 miles south-west), Over (7 miles south-west) and Greenbank (3 miles south-west).
What’s near Higher Wincham
Typical jobs here are in homes near The Rudheath Senior Academy, St John the Evangelist and Wincham Community Primary School. The nearest railway station is Lostock Gralam station, about 1.1 miles south. Nearby you will also find Victoria Infirmary (2.5 miles south-west) and Cuckooland Museum (2 miles north-east). Green spaces nearby include Neumann's Flash and Marbury Reedbed Nature Reserve.
Also near Higher Wincham
What else we do in Higher Wincham
Common questions in Higher Wincham
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How it works
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Clear the area around the damage
- Let the surface dry out before the visit
- Keep a parking space free if you can
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
Should you replace it?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Higher Wincham customers choose us
- Usually one visit, start to finish
- Rooms protected and left tidy
- CHAS and Constructionline accredited
- Colour-matched on site
Take a look at our pricing and resurfacing vs replacement cost guide.
Common problems we fix in Higher Wincham
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
The things clients normally mention when they call include:
- A coating lifting around the plughole
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
- Brown or grey marks that don’t clean off
Questions to ask before booking
- What preparation is included
- How your room will be protected
- How changes to the job are handled
- How long the guarantee is and what it covers
Aftercare tips
Once the work has cured, treat it gently:
- Fix dripping taps quickly
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
- Respect the curing time we give you
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
