Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Marston, Cheshire West and Chester
Fixed-price bath re-enamelling in Marston and the surrounding area, normally in one visit.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Several chips and rust patches
About our bath re-enamelling in Marston
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with a period or roll-top bath worth keeping and lots of chips and rust spots, we can help.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.
- Area
- Marston (CW9)
- Area hub
- Cheshire West and Chester
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Marston questions
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
How long does re-enamelling take?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you come to Marston?
Yes. We cover the whole UK and travel to Marston. Send photos and we will quote, or call 0345 017 0787.
Towns and villages near Marston
Also in Marston
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Keep toiletries on a shelf rather than in the bath
- Do not leave a chip unrepaired
- Use washing-up liquid and a soft cloth
- Avoid suction-cup mats
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Where we work around Marston
Marston is about 1 mile north-east of Northwich, in Cheshire West and Chester. Jobs in Marston are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Marston is one of 224 towns and villages in Cheshire West and Chester we cover. Our nearest city page is Manchester, about 18 miles away.
Our technicians cover all of the CW9 postcode area and the streets around it. Whether you live on The Brambles, Hedgerow Drive and The Coppice or anywhere nearby, a technician can come to you. You will find Marston on the B5075, which makes it straightforward to reach. Neighbouring places we cover include Wincham (1 mile east), Witton (1 mile south), Higher Wincham (1 mile north-east), Lostock Gralam (1 mile east) and Rudheath (1 mile south). Within a short drive, we also cover Winsford (6 miles south), Frodsham (9 miles west), Hartford (3 miles south-west), Over (6 miles south), Wharton (5 miles south) and Helsby (11 miles west).
What’s near Marston
We visit homes around Verdein Park, St Paul's Church and The Salt Barge pub, among other places. Also close by are The Rudheath Senior Academy (1.2 miles south), The Rudheath Senior Academy (1.2 miles south) and Victoria Road Primary School (0.9 miles south). The nearest railway station is Northwich station, roughly 0.8 miles south of the centre. Other landmarks nearby include Victoria Infirmary (1.3 miles south-west) and Cuckooland Museum (3.2 miles north-east). Green spaces nearby include Neumann's Flash and Marbury Reedbed Nature Reserve.
Landlords, agents and businesses in Marston
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Marston as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
What happens on the day
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take the best part of a day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the next day.
How to prepare
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
- Have a window or extractor fan available
Ask for a price
If you’re in Marston and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Common problems we fix in Marston
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Signs it’s time to call us include:
- Wear marks under the taps
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
Comparing quotes
- Whether there are any call-out or travel charges
- How the colour is matched
- Aftercare advice
- How your room will be protected
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Honest limits
We will always be straight with you, so here’s what a repair won’t do:
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly.
Materials we work on in Marston
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- What kind of damage it is
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- The material and finish
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- A picture taken from further back
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
About our accreditations · Every repair comes with a one-year guarantee.
