Sefton · England
Bath Re-enamelling for Ince Blundell homes
Full bath re-enamelling and resurfacing in Ince Blundell, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
Bath re-enamelling in Ince Blundell without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We work on pressed steel baths, basins & shower trays and cast iron baths, and people most often call us about a bath that stays dull however much you clean it and a roll-top that’s seen better days.
All our work comes with our one-year guarantee, wherever you are in Sefton.
- Area
- Ince Blundell (L38)
- Area hub
- Sefton
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we are called out for in Ince Blundell
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
You may need us if you’ve spotted any of these:
- Several chips and rust patches
- An outdated colour you’d like to change
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
Comparing quotes
- What protection goes down before work starts
- Who will actually do the work
- When it can be used again
- What preparation is included
What we can’t put right
It helps to know what we can’t do too:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
Send us pictures and we will tell you honestly.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Looking after it afterwards
Looking after the surface is easy:
- Dry the bath after use to stop limescale
- Don’t let dyes or oils sit on the finish
- Never use suction bath mats
- Leave the bath for the full curing time before using it
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- The type of damage
- Doing more than one item at once
- Any earlier repairs that need removing first
- What the surface is made of
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- Any details about the material
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes most of the day. If anything looks different from your pictures, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
- Open a window if you can
Getting a price
The quickest way to a price is to send two or three pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.
Advice
About Ince Blundell
Ince Blundell is about 3 miles north of Crosby, in Sefton. Whether you are in the middle of Ince Blundell or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 36 places across Sefton. Our jobs stretch from Ince Blundell to Liverpool (9 miles away).
Jobs in L38 are booked in the same way as anywhere else. You will find streets such as Victoria Road, Lady Green Court and Back O the Town Lane, all of which we cover. Neighbouring places we cover include Carr Houses (1 mile north-east), Lady Green (1 mile north-west), Little Crosby (1 mile south), Hightown (1 mile west) and Thornton (2 miles south-east). Larger places within reach include Southport (8 miles north), Bootle (4 miles south-east), Formby (3 miles north-west), Maghull (4 miles east), Litherland (4 miles south) and Seaforth (4 miles south).
Around Ince Blundell
In Ince Blundell, that means homes near St Mary's Catholic Primary School, St Mary's Church and St Michael's Church of England High School. For rail, the closest station is Hightown station, about 1.4 miles west of the centre. Further afield, we also cover the area around The Village Museum (1.2 miles south) and Fazakerley Hospital (5.3 miles south-east). The countryside around Ince Blundell includes Cabin Hill National Nature Reserve and Crosby Marina.
Places near Ince Blundell
Also in Ince Blundell
Landlord and trade work in Ince Blundell
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We’re used to working with agents and managing companies. Send the address, photos and access details.
FAQs for Ince Blundell
How do I get a price for bath re-enamelling in Ince Blundell?
Prices start from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so mention it when you send pictures.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
