Worcestershire · England
Bath Re-enamelling in Hill Side
Local bath re-enamelling for Hill Side: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
Bath re-enamelling in Hill Side without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Typical jobs include a peeling or bubbling previous coating and a bath that stays dull however much you clean it, in acrylic baths, Victorian roll-tops and pressed steel baths.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Area
- Hill Side (WR6)
- Region
- Worcestershire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Hill Side
Often the bath has just had decades of use, and only the surface is worn. The body of the bath is normally perfectly sound.
Look out for these signs:
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
Before you book anyone
- What protection goes down before work starts
- Whether the price is fixed and includes VAT
- When it can be used again
- If travel is included in the price
What bath re-enamelling costs
Prices start from £350. We price every job individually. The main factors are:
- Unusual colours or finishes
- Doing more than one item at once
- The size and number of damaged areas
- The material and finish
A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from pictures
Before you send pictures, a few simple things make all the difference:
- Your postcode, so we can check dates
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- A wider photo showing the entire bath
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
Also near Hill Side
What else we do in Hill Side
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Most jobs done in one visit
- Every repair guaranteed for a year
- Colours mixed by hand to suit your surface
- Same prices wherever you are
Read our full price list and guide to resurfacing and replacement costs.
Landlords, agents and businesses in Hill Side
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
If you manage property in Hill Side, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
How it works
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a full day. The room is left tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Let the surface dry out before the visit
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
Ask for a price
Email us a picture of the damage and one of the whole item, with your WR6 postcode, and we will come back with a fixed quote.
Advice
Hill Side: your questions answered
Will there be a smell?
Expect a mild smell while we are working, which fades afterwards.
Are there extra charges for Hill Side?
Travel is included in the price, with the same prices everywhere we work.
What information do you need?
Send photos through the quote form or call 0345 017 0787.
Will the price change on the day?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your photos and you will get one combined price.
Do you work in Hill Side?
Yes, we do. Repair technicians travel to Hill Side from across the region, with no extra charge for travel.
Is repairing better than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
What a repair can’t fix
We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Leaks from fittings rather than the bath
- Problems we can’t see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we will tell you honestly before booking.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Hill Side and the surrounding area
Hill Side is about 7 miles north-west of Worcester, in Worcestershire. Our technicians come to homes and businesses in Hill Side and the surrounding area, so you do not need to take anything anywhere. We work in 376 places across Worcestershire. Our nearest city page is Birmingham, about 25 miles away.
All of WR6 is within our area. Neighbouring places we cover include Martley (1 mile south), Ockeridge (2 miles north-east), Little Witley (2 miles north-east), Holt (3 miles east) and Great Witley (3 miles north). Within a short drive, we also cover Worcester (7 miles south-east), Kidderminster (11 miles north-east), Bromsgrove (14 miles north-east), Great Malvern (9 miles south), Droitwich Spa (9 miles east) and Stourport-on-Severn (7 miles north-east).
Local landmarks in Hill Side
Typical jobs here are in homes near The Crown pub, The Chantry School and Martley CofE Primary School, among other places. You will also find Church of St Peter (0.8 miles south) and The Chantry School (0.7 miles south). Well-known places in the area include Olivers Mound Castle (4.4 miles north-east). Not far away are Ankerdine Hill.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Wash away dyes and oils after use
- Never use suction bath mats
- Leave the bath for the full curing time before using it
- Wipe the bath dry after use in hard water areas
Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
