Worcestershire · England
Bath re-enamelling & resurfacing in Little Witley, Worcestershire
Bath re-enamelling in Little Witley without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- Staining under the taps and around the waste
- Wear marks under the taps
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our bath re-enamelling in Little Witley
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. If you are dealing with an old resurfacing that’s failing and enamel that’s lost its shine and feels rough, we can help, on basins & shower trays, pressed steel baths and cast iron baths alike.
You get a one-year guarantee, the same in Little Witley as everywhere else we work.
- Area
- Little Witley (WR6)
- Area hub
- Worcestershire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
The process
You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take most of the day, and you can get on with other things while we’re there.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Tell us about parking, stairs or access
- Clear the area around the damage
- Let us know which floor the room is on
Ask for a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Related advice
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Nearby places to Little Witley
More services for Little Witley
Signs you need bath re-enamelling in Little Witley
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Signs it’s time to call us include:
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
- A coloured bath you want in white
What your quote should include
- A fixed price, and whether VAT is included
- What prep work is covered
- How changes to the job are handled
- Whether the colour is mixed to match
Where we work around Little Witley
Little Witley is about 5 miles south of Stourport-on-Severn, in Worcestershire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover all 376 towns and villages in Worcestershire. Our jobs stretch from Little Witley to Birmingham (about 23 miles away).
All of WR6 is covered. Whether you live on Church Lane, Well Lane and Bank Road or anywhere nearby, we can come to you. Neighbouring places we cover include Ockeridge (1 mile south), Holt (1 mile south-east), Hillhampton (2 miles north), Hill Side (2 miles south-west) and Great Witley (2 miles north-west). Within a short drive, we also cover Worcester (7 miles south-east), Kidderminster (9 miles north), Bromsgrove (12 miles east), Great Malvern (10 miles south), Droitwich Spa (7 miles east) and Stourport-on-Severn (5 miles north).
What’s near Little Witley
Our customers here include homes close to Church of St Michael and the streets around them. Nearby you’ll also find Olivers Mound Castle (2.2 miles north-east). Not far away are Abberley Hill.
When we’d advise against a repair
Some jobs are not right for a repair, including:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there is no premium for Little Witley. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
- We’ll tell you if it’s not worth repairing
- Nothing taken out or refitted
Take a look at our full price list or guide to resurfacing and replacement costs.
Your questions about bath re-enamelling in Little Witley
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Do you cover Little Witley?
We do. We send a technician to Little Witley for every job, and the price is the same as everywhere else.
Looking after it afterwards
How the surface is treated afterwards matters:
- Avoid suction-cup mats
- Get any chip repaired quickly
- Use washing-up liquid and a soft cloth
- Do not leave bottles, razors or sponges standing on the surface
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
