Somerset · England

Bath re-enamelling & resurfacing in Nynehead, Somerset

Full bath re-enamelling and resurfacing in Nynehead, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • Staining under the taps and around the waste
  • A roll-top that’s seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Nynehead

FAQs for Nynehead

Do you charge for travel?

We do not add a call-out fee. Your fixed price includes everything.

How do I book?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is there any odour?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

Can you re-enamel a roll-top bath?

Yes. Inside and out if you’d like.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders.

Do you come to Nynehead?

Yes. We work across the UK and travel to Nynehead. Send pictures and we’ll quote, or call 0345 017 0787.

Is there a guarantee?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Bath re-enamelling in Nynehead, done in place

After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s chips and rust in more than one place and stains that won’t shift, we can help, on acrylic baths, pressed steel baths and Victorian roll-tops alike.

Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.

Before and after: an old basin refinished to bright white
Location
Nynehead (TA21)
Region
Somerset
Guarantee
12 months on all our work
Price
From £350. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

Looking after it afterwards

It’s all simple stuff, just a few sensible habits:

  • Keep toiletries on a shelf rather than in the bath
  • Wipe the bath dry after use in hard water areas
  • Don’t let dyes or oils sit on the finish
  • Don’t leave a chip unrepaired

Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.

Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.

Materials and what they mean for the repair

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Where we work around Nynehead

Nynehead is about 2 miles north of Wellington, in Somerset. Wherever you are in the TA21 postcode area, we carry out the work at your property. We cover 640 places in Somerset.

Postcode districts we cover here: TA21. That includes homes on Blackdown View and Roundoak Gardens. We also travel to Oake (2 miles north), Hillcommon (2 miles north), Chipley (2 miles west), Milverton (2 miles north-west) and Fitzhead (4 miles north-west). Within a short drive, we also cover Taunton (5 miles east), Bridgwater (13 miles north-east), Chard (14 miles south-east), Sydenham (13 miles north-east), Wilton (5 miles east) and Comeytrowe (4 miles east).

Local landmarks in Nynehead

Our clients here include homes close to Church of All Saints and Court Fields School. Further afield, we also cover the area around Taunton Castle (4.6 miles east) and Merrifield Children's Unit (2.9 miles north-east). For a walk, there’s Knowle Hill.

Map of Nynehead © OpenStreetMap contributors

Why repair rather than replace?

Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

What you get with us

  • Technicians who travel to you, UK-wide
  • We leave the room as we found it
  • Free fixed quotes from pictures
  • CHAS and Constructionline accredited

Take a look at our full price list or guide to resurfacing and replacement costs.

Landlord and trade work in Nynehead

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.

When we would advise against a repair

Not everything can be repaired, and we’ll tell you before we start. We cannot fix:

  • Damage hidden under a previous coating, until it’s stripped back
  • A bath split right through the body
  • An acrylic bath that flexes badly underfoot

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Basins & shower trays
  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths

The process

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Preparing for the visit

  • Make sure the area is dry
  • Keep children and pets away from the room on the day
  • Move bottles, mats and clutter away from the area

Get a quote

To get a price, send two or three pictures through our quote form or ring us. We will say immediately if a repair is the right fix.

Get a free quote

Advice

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Prices and what affects them

Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:

  • Whether it’s a chip, crack, burn or wear
  • What the surface is made of
  • How many areas need work
  • How hard the colour is to match

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.

How to get a fixed quote

Before you send pictures, a few simple things make all the difference:

  • A clear, close picture of the problem area
  • A coin beside the damage so we can judge size
  • Natural light rather than flash
  • A wider photo showing the whole bath

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.