South Gloucestershire · England
Bath re-enamelling & resurfacing in Hillfields, South Gloucestershire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Hillfields. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Chips and rust in more than one place
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Bath re-enamelling in Hillfields without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. If you’re dealing with a bath that stays dull however much you clean it and a bath in a colour that no longer suits, we can help, on pressed steel baths, Victorian roll-tops and acrylic baths alike.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Area
- Hillfields (BS16, BS15)
- Area hub
- South Gloucestershire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Hillfields
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Your questions about bath re-enamelling in Hillfields
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Is there a call-out fee?
We don’t add a call-out fee. The fixed price covers the visit and the work.
What happens next?
You get a fixed quote and available dates. If we need another angle, we will ask.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
Hillfields and nearby
Hillfields is about 1 mile south-east of Fishponds, in South Gloucestershire. Our technicians come to homes and businesses in Hillfields, so you don’t need to take anything anywhere. Hillfields is one of 110 places in South Gloucestershire where we work. Our nearest city page is Birmingham, about 74 miles away.
Jobs in BS16 and BS15 work the same way as everywhere else we cover. We regularly work on streets such as Market Square, The Greenway and Maple Avenue. With the B4048 close by, Hillfields is simple for us to get to. If you are just outside Hillfields, we cover Chester Park (1 mile south-west), Soundwell (1 mile east), Mayfield Park (1 mile north-west), Two Mile Hill (1 mile south) and Burchells Green (1 mile south-west). Larger places within reach include Yate (7 miles north-east), Bradley Stoke (4 miles north), Thornbury (10 miles north), Patchway (5 miles north-west), Stoke Gifford (3 miles north) and Morton (10 miles north).
Landmarks near Hillfields
We visit homes around Minerva Primary Academy, St Stephen's Church and Bristol Brunel Academy and the streets around them. You will also find Oldbury Court Estate (1.1 miles north) and The Kings Arms (0.9 miles south-east). The nearest railway station is Stapleton Road station, roughly 2.1 miles west of the centre. Nearby you will also find Glenside Hospital Museum (1.4 miles north-west) and Barton Regis Rural District (1.7 miles west). For a walk, there is Lodge Hill.
How to look after the repair
Simple care helps the repair last. Our advice:
- Dry the bath after use to stop limescale
- Store bottles off the bath
- Repair dripping taps early
- Do not let dyes or oils sit on the finish
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
What affects the price in Hillfields
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- What the surface is made of
- The type of damage
- Doing more than one item at once
- The colour and finish to match
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Send pictures for a quote
You can usually get a fixed price without us visiting. To help us price it:
- One picture of the whole bath
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
When a repair isn’t the answer
A repair is not right for every job, including:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Hillfields
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Also near Hillfields
Other services in Hillfields
Should you replace it?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- Fixed prices from your pictures
- One-year guarantee on every repair
- No extra charge for your area
- Rooms protected and left tidy
Read our prices page or guide to resurfacing and replacement costs.
What happens on the day
We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
Ask for a price
Upload photos of the damage and one of the entire item, and tell us you are in Hillfields, and we’ll come back with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
