South Gloucestershire · England
Bath re-enamelling & resurfacing in Two Mile Hill, South Gloucestershire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Two Mile Hill. Send photos for a free, fixed quote.
- Resurfacing from £350
- A roll-top that is seen better days
- Stains that will not shift
Bath re-enamelling in Two Mile Hill without replacing anything
Most baths are re-enamelled in a day. Nothing is disconnected or removed. Our technicians work on basins & shower trays, cast iron baths and Victorian roll-tops, and common reasons people contact us are a bath in a colour that no longer suits and wear marks under the taps.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Two Mile Hill (BS15)
- County
- South Gloucestershire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Two Mile Hill
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
It’s worth getting a quote if you see:
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
- A bath that stays dull however much you clean it
- Several chips and rust patches
What your quote should include
- How to look after the finish
- How long the guarantee is and what it covers
- How soon you can use it again
- Is the price fixed, and does it include VAT?
What affects the price in Two Mile Hill
Prices start from £350. There is no area surcharge for Two Mile Hill. The price reflects:
- How hard the colour is to match
- Where the damage is and how we get to it
- The material and finish
- How many areas need work
Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your photos
When you take your pictures, these tips help us give you a firm price:
- One picture of the whole bath
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
How the visit works
The work is clean and fairly quiet. Protection goes down first, then the job itself takes a full day. Before we leave, we explain how soon it can be used and how to look after it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the day after.
How to prepare
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
Getting a price
To get a price, send two or three pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.
Advice
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Landlord and trade work in Two Mile Hill
We work for landlords, letting agents and housing providers in Two Mile Hill as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
Questions from Two Mile Hill
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Do you cover Two Mile Hill?
We do. Repair technicians travel to Two Mile Hill from across the region, and the price is the same as everywhere else.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Are there extra charges for Two Mile Hill?
We do not add a call-out fee. Your fixed price includes everything.
Can you price it without visiting?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
How do I get a price for bath re-enamelling in Two Mile Hill?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your BS15 postcode.
What happens after I send photos?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Towns and villages near Two Mile Hill
Also in Two Mile Hill
When we’d advise against a repair
To be straight with you, there are a few things a repair will not fix:
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
About Two Mile Hill
Two Mile Hill is about 1 mile south-east of Fishponds, in South Gloucestershire. Our repair technicians come to homes and businesses in Two Mile Hill and nearby villages, so there is no workshop to go to. We work in all 110 towns and villages across South Gloucestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 74 miles away.
Postcode districts we cover here: BS15. That includes homes on Primrose Lane, Talbot Avenue and Two Mile Hill Road and the roads around them. Close by, we cover Burchells Green (1 mile west), Chester Park (1 mile north-west), Whiteway (1 mile west), Hillfields (1 mile north) and Soundwell (1 mile north-east). Within a short drive, we also cover Yate (7 miles north-east), Bradley Stoke (5 miles north), Thornbury (10 miles north), Patchway (5 miles north-west), Stoke Gifford (4 miles north) and Morton (11 miles north).
Local landmarks in Two Mile Hill
Locally, our jobs take us to homes close to The Kings Arms, Church of St Michael and Two Mile Hill Primary School. You’ll also find John Cabot Academy (0.5 miles south) and Troopers Hill (0.9 miles south-west). For rail, the closest station is Lawrence Hill station, roughly 2 miles west of the centre. Further afield, we also cover the area around Barton Regis Rural District (1.8 miles west) and Willsbridge Castle (2.5 miles south-east). Not far away are Lodge Hill.
Repair or replace in Two Mile Hill?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- We’ll tell you if it’s not worth repairing
- Fixed prices from your photos
- Repair technicians who travel to you, UK-wide
Take a look at our full price list or bath cost comparison.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
- Dry the bath after use to stop limescale
- Do not let dyes or oils sit on the finish
Dry the bath after use if possible, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
About our accreditations · Every repair comes with a one-year guarantee.
