Kirklees · England
Bath re-enamelling & resurfacing in Holme, Kirklees
Full bath re-enamelling and resurfacing in Holme, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
Bath re-enamelling in Holme, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s a coating lifting around the plughole and wear marks under the taps, we can normally put it right.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Holme (HD9)
- Area hub
- Kirklees
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair can’t fix
It helps to know what we cannot do:
- Problems we cannot see until an old finish comes off
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Keep toiletries on a shelf rather than in the bath
- Don’t let dyes or oils sit on the finish
- Keep suction mats out of the bath
- Have chips seen to early
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Our work in Holme
Holme is about 7 miles south of Huddersfield, in Kirklees. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Holme is one of 189 places in Kirklees where we work. We work right across the region, from Holme to Manchester (17 miles away).
We cover every part of HD9 and the streets around it. Jobs here include addresses on Turf Gate, Woodhead Road and Fieldhead Lane. We also travel to Flush House (1 mile north), Holmbridge (1 mile north-east), Burnlee (2 miles north-east), Upperthong (2 miles north-east) and Wilshaw (2 miles north). Further out, we also cover Huddersfield (7 miles north), Dewsbury (13 miles north-east), Batley (14 miles north-east), Mirfield (11 miles north-east), Liversedge (12 miles north-east) and Cleckheaton (13 miles north).
Near you in Holme
Our clients here include homes close to Church of St David, Bridge Tavern and Holme Junior and Infant School, among other places. For rail, the closest station is Brockholes station, roughly 4.2 miles north-east. Further afield, we also cover the area around St. Luke's Hospital (5.9 miles north) and Last Of The Summer Wine Exhibition (2.3 miles north-east). For a walk, there’s Black Hill.
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Questions from Holme
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Are there extra charges for Holme?
No. Our quotes include travel, with the same prices everywhere we work.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
How do I get a price for bath re-enamelling in Holme?
Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up and a picture of the whole item and your postcode.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Nearby places to Holme
What else we do in Holme
Repairing versus replacing in Holme
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the whole surface with the bath left where it is. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
- Work done at your home or business
- Dust sheets down, tidy finish
See our full price list and guide to resurfacing and replacement costs.
What we do, step by step
The work is clean and fairly quiet. We protect the area first, then the job itself takes a full day. Before we leave, we explain the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Keep pets and children out of the room while we work
- Let us know about parking or access
- Ensure the room can be ventilated
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Related advice
Landlord and trade work in Holme
Landlords, letting agents and housing providers in Holme use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we take into account:
- Previous DIY repairs that have to come out
- How many areas need work
- What the surface is made of
- Unusual colours or finishes
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- One picture of the whole bath
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
Upload pictures of the damage and a wider shot of the entire item, with your HD9 postcode, and we will reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
