Cumbria · England

Bath Re-enamelling for Holmrook homes

Our technicians come to Holmrook for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.

  • Resurfacing from £350
  • Several chips and rust patches
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Holmrook?

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

Bath re-enamelling in Holmrook without replacing anything

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for an outdated colour you’d like to change and lots of chips and rust spots, in pressed steel baths, Victorian roll-tops and acrylic baths.

All our work is covered by a one-year guarantee, wherever you are in Cumbria.

Technician in a mask working on a freestanding roll-top bath
Where
Holmrook (CA19)
Region
Cumbria
Warranty
A year, on every repair
Quotes
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

What affects the price in Holmrook

Resurfacing from £350. There is no area surcharge for Holmrook. What changes the price is:

  • The type of damage
  • Unusual colours or finishes
  • Any earlier repairs that need removing first
  • How many items we do on one visit

The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.

Getting a price from photos

Photographing the damage takes a minute, and it saves a visit. Please include:

  • One sharp close-up of the damage
  • Natural light rather than flash
  • A picture taken from further back
  • Whether it’s been repaired or coated before

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

When we would advise against a repair

We won’t take on work that won’t last, so these are the limits:

  • Acrylic that moves when you stand in it
  • A bath split right through the body
  • Steel that has corroded right through

Send us pictures and we will tell you honestly before you book.

Surfaces we repair

  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths

Landlords, agents and businesses in Holmrook

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

If you manage property in Holmrook, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.

What we are called out for in Holmrook

Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, typically first under the taps and around the waste.

Keep an eye out for these signs:

  • Stains that won’t shift
  • Chips and rust in more than one place
  • A bath in a colour that no longer suits
  • An original cast iron bath that needs restoring

Before booking anyone

  • How the colour is matched
  • What happens if the damage is worse than the photos show
  • Whether there are any call-out or travel charges
  • How long it needs to cure

Choosing a repair company

About Holmrook

Holmrook is about 13 miles south-east of Whitehaven, in Cumbria. We visit customers in Holmrook and the surrounding area, so you don’t need to take anything anywhere. Holmrook is one of 438 places in Cumbria we cover. We work right across the region, from Holmrook to Liverpool (70 miles away).

Our technicians cover all of the CA19 postcode area and the streets around it. We also cover the places around Holmrook: Drigg (1 mile west), Ravenglass (2 miles south), Santon (2 miles north-east), Seascale (2 miles north-west) and Gosforth (3 miles north). Larger places within reach include Whitehaven (13 miles north-west), Cleator Moor (10 miles north), Millom (13 miles south-east), Bransty (13 miles north-west), Egremont (8 miles north-west) and Hensingham (12 miles north-west).

Landmarks near Holmrook

Around Holmrook, we work in homes near St Peter's Church. The nearest railway station is Drigg station, about 0.9 miles south-west. Well-known places in the area include Muncaster Castle (2.6 miles south-east). The countryside around Holmrook includes Muncaster Tarn and Bamse's Wood.

Map of Holmrook © OpenStreetMap contributors

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Keep toiletries on a shelf rather than in the bath
  • Avoid suction-cup mats
  • Stick to gentle, non-abrasive cleaners
  • Leave the bath for the full curing time before using it

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.

Common questions in Holmrook

How quickly can you book me in?

That depends on our diary for your area. We will offer you dates when we send your quote.

Can tenants book a repair?

Yes. Check with your landlord; we can send the quote to them too.

Do you work in Holmrook?

We do. We send a technician to Holmrook for every job, and the price is the same as everywhere else.

Do you cover the entire of Cumbria?

The whole UK, including all of Cumbria. Just include your postcode and we’ll confirm dates.

Can you change the colour of my bath?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

What if the damage is worse than the pictures show?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Is my repair covered?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Repairing versus replacing in Holmrook

For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

What you get with us

  • Everything repaired in place
  • Honest advice, even when it means no job
  • Most jobs done in one visit
  • A fixed quote before booking

See our full price list and resurfacing vs replacement cost guide.

What happens on the day

There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to the best part of a day, including clearing up.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Before we arrive

  • Plan for the room to be out of bounds to pets and children
  • Mention any earlier repairs or resurfacing
  • Let us know about parking or access

Ask for a price

Email us a picture of the damage and one of the entire item, with your CA19 postcode, and we’ll come back with a fixed quote.

Get a free quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.