Cumbria · England
Bath re-enamelling & resurfacing in Millom, Cumbria
Damaged bath in Millom? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
Bath re-enamelling in Millom, done in place
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Nothing is disconnected or removed. If you are dealing with an original cast iron bath that needs restoring and a coloured bath you want in white, we can help, whatever the material.
We stand behind the work with a one-year guarantee.
- Where
- Millom (LA18)
- Area hub
- Cumbria
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
Simple care helps the repair last. We recommend:
- Don’t use the bath until it has fully cured
- Repair dripping taps early
- Never use suction bath mats
- Wipe the bath dry after use in hard water areas
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
What we do, step by step
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we are doing. It typically takes the best part of a day, and you can get on with other things while we’re there.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
- Move bottles, mats and clutter away from the area
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
Advice
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
If you manage property in Millom, we will quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair will not do:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- A bath that’s rusted through
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Millom
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Covering Millom
Millom is about 7 miles north of Barrow-in-Furness, in Cumbria. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 438 places in Cumbria. Our jobs stretch from Millom to Liverpool (about 57 miles away).
We work across LA18 and the streets around it. From Station Road, Market Street and St George's Road or anywhere nearby, we can come to you. Millom is on the A5093, so it’s easy for us to reach. We also cover the places around Millom: Holborn Hill (1 mile north-west), The Green (3 miles north), Hallthwaites (3 miles north), Lady Hall (4 miles north) and Foxfield (4 miles north-east). Further out, we also cover Barrow-in-Furness (7 miles south), Ulverston (7 miles east), Hindpool (7 miles south), Salthouse (7 miles south), Dalton-in-Furness (5 miles south-east) and Risedale (7 miles south).
What’s near Millom
Around Millom, we work in homes near Millom Infant School, Millom School and St George's Church, among other places. Millom has its own railway station: Millom station. A little further out are Millom Castle (0.8 miles north) and Millom Hospital (under half a mile south-east). The countryside around Millom includes Hodbarrow Nature Reserve.
Repair or replace in Millom?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Millom. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Millom customers choose us
- We come to you, anywhere in the UK
- Colour-matched on site
- Fixed prices from your pictures
- CHAS, Constructionline and SafeContractor accredited
Read our pricing or guide to resurfacing and replacement costs.
Common questions in Millom
What happens after I send photos?
We review the photos and send a fixed quote with dates.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How do I get a price for bath re-enamelling in Millom?
Resurfacing from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your LA18 postcode.
What areas do you cover?
The entire UK, including all of Cumbria. Send your postcode with your pictures and we’ll confirm dates.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Someone resurfaced my bath and it’s peeling. Can you help?
Normally, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Towns and villages near Millom
Other services in Millom
What bath re-enamelling costs
Resurfacing from £350. We price every job individually. What matters most is:
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- How many areas need work
- What the surface is made of
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Before you send pictures, a few simple things make all the difference:
- A clear, close picture of the problem area
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- A photo taken from further back
Send us pictures of the damage and one of the entire item, with your LA18 postcode, and we will reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
