Dumfries and Galloway · Scotland

Bath re-enamelling & resurfacing in Holywood, Dumfries and Galloway

Full bath re-enamelling and resurfacing in Holywood, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • A roll-top that is seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Holywood homes

Bath re-enamelling in Holywood, done in place

After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair acrylic baths, basins & shower trays and cast iron baths, and people most frequently call us about an outdated colour you’d like to change and a period or roll-top bath worth keeping.

The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.

Technician in a mask working on a freestanding roll-top bath
Location
Holywood (DG2)
Area hub
Dumfries and Galloway
Guarantee
12 months on all our work
Price
From £350. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026

Aftercare tips

Simple care helps the repair last. We recommend:

  • Fix dripping taps quickly
  • A quick wipe after use keeps limescale away
  • Don’t use the bath until it has fully cured
  • Avoid suction-cup mats

The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

The process

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We tidy up before we leave and tell you when it’s ready to use.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Mention any earlier repairs or resurfacing
  • Keep children and pets away from the room on the day

Getting a price

You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

Get a fixed quote

Advice

Landlord and trade work in Holywood

We carry out planned and one-off repairs for housing associations and facilities teams in Dumfries and Galloway and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

Repair or replace in Holywood?

There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why book with us

  • Every repair guaranteed for a year
  • We’ll tell you if it’s not worth repairing
  • We leave the room as we found it
  • Same prices wherever you are

Read our full price list or guide to resurfacing and replacement costs.

Holywood questions

Can you do more than one item on the same visit?

Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.

How do I book?

Some photos, your postcode and how to reach you. On the day, access to the room.

Is it worth repairing rather than replacing?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Is there a call-out fee?

We do not add a call-out fee. Your fixed quote includes everything.

Can you repair something that’s been repaired before?

Generally, yes. Let us know what was used before.

Does re-enamelling smell?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

Can a failed resurfacing be redone?

Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.

Covering Holywood

Holywood is about 3 miles north-west of Dumfries, in Dumfries and Galloway. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Holywood is one of 138 places in Dumfries and Galloway where we work. You can also see our page for Glasgow, about 58 miles away.

Our technicians cover all of the DG2 postcode area and the streets around it. Streets in the area include School Road and Dercongal Road. Neighbouring places we cover include Newbridge (1 mile south), Newbridge Drive (1 mile south-east), Kirkton (2 miles north-east), Terregles (2 miles south-west) and Locharbriggs (2 miles east). Further out, we also cover Lockerbie (12 miles east), Dalbeattie (14 miles south-west), Heathhall (3 miles east), Lochmaben (8 miles east), Troqueer (3 miles south-east) and Thornhill (11 miles north-west).

Local landmarks in Holywood

Locally, our jobs take us to homes close to Holywood Parish Church And Churchyard and Maxwelltown High School, among other places. The closest station to Holywood is Dumfries station, roughly 2.6 miles south-east of the centre. Further afield, we also cover the area around Dumfries and Galloway Royal Infirmary (3.6 miles south-east) and Dalswinton Castle (2.7 miles north). For a walk, there is Carse Loch.

Map of Holywood © OpenStreetMap contributors

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

What we can’t put right

Honesty matters more than a booking, so here’s what a repair will not do:

  • Anything hidden under an old coating, until we remove it
  • A poorly supported acrylic bath, until it’s firmed up
  • Plumbing leaks, which need a plumber

Not sure? Send pictures and we’ll give you a straight answer.

Surfaces we repair

  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths

Repairs by material

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Prices and what affects them

Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:

  • The material
  • Previous DIY repairs that have to come out
  • How much damage there is
  • Unusual colours or finishes

What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.

How to get a fixed price

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • A coin beside the damage so we can judge size
  • The material, if you know it
  • A clear, close picture of the problem area
  • The postcode, so we can plan the visit

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.