Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Hook, Pembrokeshire
Damaged bath in Hook? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A peeling or bubbling previous coating
About our bath re-enamelling in Hook
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Common call-outs are for a peeling or bubbling previous coating and several chips and rust patches, across acrylic baths, basins & shower trays and cast iron baths.
You get a one-year guarantee, the same in Hook as everywhere else we work.
- Area
- Hook (SA62)
- Area hub
- Pembrokeshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath re-enamelling in Hook
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Which areas do you work in?
Everywhere in the UK, Hook included. Travel is included in the price.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How long does re-enamelling take?
Generally one day, with the bath ready the next day. A badly pitted bath can need a second day.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
How it works
We work cleanly and quietly. Protection goes down first, then the job itself takes a full day. Before we leave, we explain how soon it can be used and how to care for it.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the following day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Related advice
Nearby places to Hook
More services for Hook
Hook and the surrounding area
Hook is about 3 miles south-east of Haverfordwest, in Pembrokeshire. Across the SA62 area, a technician comes to you. We cover all 223 towns and villages in Pembrokeshire, from the larger towns to small villages.
Our visits in SA62 work the same way as everywhere else we cover. We regularly work on streets such as Leven Close, Meurigs Croft and Newtown Road. Neighbouring places we cover include Deerland (1 mile south-east), Boulston (1 mile north-west), Trooper's Inn (1 mile south-west), Llangwm (1 mile south-east) and Freystrop (1 mile west). Within a short drive, we also cover Haverfordwest (3 miles north-west), Milford Haven (6 miles south-west), Pembroke (6 miles south), Pembroke Dock (5 miles south), The Marsh (3 miles north-west) and Dinbych-y-Pysgod (11 miles south-east).
Around Hook
Around Hook, we work in homes near New Anchor Inn, Boulston parish church and Hook C.P. School. Hook’s nearest station is Johnston station, about 2.9 miles west. Nearby you will also find Withybush General Hospital (3.8 miles north-west) and Picton Castle (2.4 miles north-east). Green spaces nearby include Boulston Hill and Slebech Park Lake.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Prices and what affects them
Prices start from £350. Prices are worked out job by job. What matters most is:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- Whether we combine several jobs
- The colour and finish to match
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- Something in shot to show the size
- The postcode, so we can plan the visit
The quickest way to a price is to send two or three photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Landlord and trade work in Hook
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
When a repair is not the answer
We would rather lose a job than do one that will not last, so these are the limits:
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
Repairing versus replacing in Hook
A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day. Prices start from £350. Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why choose Surface Doctor in Hook
- One-year guarantee on every repair
- Dust sheets down, tidy finish
- Honest advice, even when it means no job
- Colour mixed on the day to match
Read our full price list and guide to resurfacing and replacement costs.
Signs you need bath re-enamelling in Hook
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Look out for any of the following:
- A roll-top that is seen better days
- Brown or grey marks that do not clean off
- A coating lifting around the plughole
- Several chips and rust patches
Before you book anyone
- A fixed price, and whether VAT is included
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
- Who turns up on the day
About our accreditations · Every repair comes with a one-year guarantee.
