Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Hubberston, Pembrokeshire
Our technicians come to Hubberston for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A roll-top that’s seen better days
About our bath re-enamelling in Hubberston
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include lots of chips and rust spots and a coating lifting around the plughole, in Victorian roll-tops, acrylic baths and basins & shower trays.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Hubberston (SA73)
- County
- Pembrokeshire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
The work is clean and fairly quiet. Protection goes down first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
- Keep pets and children out of the room while we work
Getting a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Read more
Places near Hubberston
Also in Hubberston
Landlord and trade work in Hubberston
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.
Hubberston and the surrounding area
Hubberston is about 1 mile west of Milford Haven, in Pembrokeshire. From the centre of Hubberston to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Hubberston is one of 223 towns and villages in Pembrokeshire we cover.
All of SA73 is within our area. That includes homes on Clay Lane, Picton Road and Church Road. We also travel to Hakin (1 mile south-east), Haven's Head (1 mile east), Gellyswick (1 mile south-west), Liddeston (1 mile north-east) and Milford Haven (1 mile east). Within a short drive, we also cover Haverfordwest (7 miles north-east), Pembroke (7 miles south-east), Pembroke Dock (5 miles east), The Marsh (7 miles north-east), Dinbych-y-Pysgod (15 miles east) and The Green (15 miles east).
Around Hubberston
Around Hubberston, we work in homes near St Francis V.R.C. School, Three Crowns pub and Milford Haven School. Hubberston’s nearest station is Milford Haven station, about 0.6 miles east of the centre. Other landmarks nearby include South Pembrokeshire Hospital (4.5 miles east) and Castle Pill (1.8 miles east). The countryside around Hubberston includes Hubberstown Pill and North Hill.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What we’re called out for in Hubberston
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Customers normally contact us about:
- A period or roll-top bath worth keeping
- A dull, rough surface that will not come clean
- Several chips and rust patches
- A coating lifting around the plughole
What to look for in a quote
- What prep work is covered
- Who will actually do the work
- The length of the guarantee and what it covers
- When it can be used again
Should you replace it?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.
What you get with us
- One visit for most repairs
- A fixed quote before booking
- Dust sheets down, tidy finish
- Honest advice, even when it means no job
Take a look at our prices page or bath cost comparison.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Stick to gentle, non-abrasive cleaners
- Don’t leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
- Wash away dyes and oils after use
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Hubberston: your questions answered
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is there a call-out fee?
We do not add a call-out fee. The fixed price covers the visit and the work.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
How we price bath re-enamelling
Prices start from £350. There is no area surcharge for Hubberston. The price reflects:
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- How many areas need work
- Previous DIY repairs that have to come out
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what helps:
- Whether it’s been repaired or coated before
- Where you are, by postcode
- A coin beside the damage so we can judge size
- What it’s made of, if you know
The quickest way to a price is to send two or three pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
