Pembrokeshire · Wales
Bath Re-enamelling in Gellyswick
Our repair technicians come to Gellyswick for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- Stains that will not shift
Bath re-enamelling in Gellyswick without replacing anything
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. We are often asked to fix a coloured bath you want in white and a dull, rough surface that won’t come clean, in Victorian roll-tops, acrylic baths and cast iron baths.
You get a one-year guarantee, the same in Gellyswick as everywhere else we work.
- Where
- Gellyswick (SA73)
- Region
- Pembrokeshire
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. You can expect it to take the best part of a day, and we’ll tell you if anything changes.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
How to get a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Nearby places to Gellyswick
What else we do in Gellyswick
FAQs for Gellyswick
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Do you work in Gellyswick?
Yes. We work across the UK and travel to Gellyswick and the rest of Pembrokeshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Gellyswick.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we’ll plan for it.
How long will the bath be out of use?
Generally one day, with the bath ready the next day. A badly pitted bath can need a second day.
What we can’t put right
A few problems are outside what a surface repair can do:
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
- A bath that’s rusted through
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Repairing versus replacing in Gellyswick
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- Everything repaired in place
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- A fixed quote before booking
Take a look at our pricing and bath cost comparison.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Landlord and trade work in Gellyswick
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Our work in Gellyswick
Gellyswick is about 1 mile west of Milford Haven, in Pembrokeshire. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Gellyswick is one of 223 places in Pembrokeshire we cover.
All of SA73 is covered. We also cover the places around Gellyswick: Hubberston (1 mile north-east), Hakin (1 mile east), Haven's Head (1 mile east), Liddeston (1 mile north-east) and Milford Haven (1 mile east). Further out, we also cover Haverfordwest (7 miles north-east), Pembroke (7 miles east), Pembroke Dock (5 miles east), The Marsh (8 miles north-east), The Green (15 miles east) and Green (7 miles east).
Around Gellyswick
Typical jobs here are in homes near Milford Haven School, St David's Church and Three Crowns pub and the streets around them. For rail, the closest station is Milford Haven station, about 1.1 miles east. Nearby you’ll also find South Pembrokeshire Hospital (4.9 miles east) and North Hill (1.9 miles south-west). The countryside around Gellyswick includes North Hill and Hubberstown Pill.
How to care for the repair
Once the work has cured, treat it gently:
- Don’t use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
- Keep suction mats out of the bath
- Have chips seen to early
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Signs you need bath re-enamelling in Gellyswick
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Keep an eye out for any of the following:
- An outdated colour you’d like to change
- An old resurfacing that is failing
- Stains that will not shift
- A bath that stays dull however much you clean it
Questions to ask before you book
- How long it needs to cure
- Whether the colour is mixed to match
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
What bath re-enamelling costs
Resurfacing from £350. There’s no area surcharge for Gellyswick. What changes the price is:
- The size and number of damaged areas
- How hard the colour is to match
- The type of damage
- Whether we combine several jobs
A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with nothing added on the day.
Quotes from your photos
When you take your pictures, these tips help us give you a firm price:
- The material, if you know it
- One sharp close-up of the damage
- Any earlier repairs or coatings
- A photo taken from further back
Upload a picture of the damage and one of the whole item, and tell us you’re in Gellyswick, and we will reply with a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
