Lancashire · England
Bath Re-enamelling for Hundred End homes
Bath re-enamelling for Hundred End, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- A coating lifting around the plughole
Bath re-enamelling at your home in Hundred End
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We work on Victorian roll-tops, acrylic baths and basins & shower trays, and the jobs we see most are brown or grey marks that don’t clean off and a bath that stays dull however much you clean it.
A one-year guarantee comes as standard.
- Where
- Hundred End (PR4)
- Area hub
- Lancashire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Hundred End?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Hundred End
- Repair technicians who travel to you, UK-wide
- We’ll tell you if it’s not worth repairing
- Most jobs done in one visit
- Colour-matched on site
See our full price list or bath cost comparison.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Where we work around Hundred End
Hundred End is about 6 miles north-east of Southport, in Lancashire. Customers in Hundred End get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. Our technicians cover all 482 towns and villages in Lancashire, from the larger towns to small villages. You can also see our page for Liverpool, about 20 miles away.
Our visits in PR4 are booked in the same way as anywhere else. We regularly work on streets such as Anchorage Avenue, Taylor's Meanygate and Hundred End Lane. Other places close to Hundred End include Becconsall (2 miles east), Holmes (2 miles south-east), Mere Brow (2 miles south), Tarleton (2 miles east) and Sollom (3 miles south-east). Larger places within reach include Preston (9 miles north-east), Chorley (11 miles east), Lytham St Anne's (7 miles north-west), Bamber Bridge (9 miles east), Leyland (8 miles east) and Fulwood (9 miles north-east).
Landmarks near Hundred End
Our customers here include homes close to Tarleton Academy. For rail, the closest station is Croston station, roughly 4.6 miles east. Other landmarks nearby include Greaves Hall (1.8 miles south-west). For a walk, there’s Martin Mere and Marshside RSPB reserve.
How the visit works
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take most of the day, and we leave the room as we found it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
Getting a price
If you’re in Hundred End and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Landlord and trade work in Hundred End
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Aftercare tips
Once the work has cured, treat it gently:
- Have chips seen to early
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
- Wash away dyes and oils after use
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Also in Hundred End
How we price bath re-enamelling
Prices start from £350. You will not pay by the hour. The price depends on:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- Access to the area
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
Most quotes are done from pictures alone. To make it quick:
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- Something in shot to show the size
- Details of any past repairs
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Do you need bath re-enamelling in Hundred End?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Keep an eye out for these signs:
- A dull, rough surface that won’t come clean
- Wear marks under the taps
- An outdated colour you’d like to change
- An old resurfacing that is failing
What to look for in a quote
- How soon you can use it again
- Whether a trained technician does the job
- What preparation is included
- Whether the price is fixed and includes VAT
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
FAQs for Hundred End
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Are there extra charges for Hundred End?
No. Our quotes include travel, and we charge the same wherever you are.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
About our accreditations · Every repair comes with a one-year guarantee.
