Lancashire · England

Bath Re-enamelling for Holmes homes

Problem with your bath in Holmes? We repair it in place, mix the colour on the day and guarantee the work for a year.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Thin, worn enamel in places
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Holmes?

Bath re-enamelling in Holmes, done in place

Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. We are often asked to fix thin, worn enamel in places and a bath in a colour that no longer suits, in Victorian roll-tops, acrylic baths and cast iron baths.

We stand behind the work with a one-year guarantee.

Where
Holmes (PR4)
Region
Lancashire
Guarantee
A year, on every repair
Price
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Repairs by material

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.

Should I try a DIY kit first?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Signs you need bath re-enamelling in Holmes

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

Typical reasons for a call-out include:

  • Enamel that’s lost its shine and feels rough
  • Worn patches where water runs and sits
  • A coating lifting around the plughole
  • An outdated colour you’d like to change

Questions to ask before you book

  • What happens if the damage is worse than the pictures show
  • Whether there are any call-out or travel charges
  • Who will actually do the work
  • Whether they match the colour on site

10 questions to ask before you book

Should you replace it?

If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Why us?

  • Every repair guaranteed for a year
  • Colour-matched on site
  • CHAS and Constructionline accredited
  • Work done at your home or business

See our pricing and resurfacing vs replacement cost guide.

How to care for the repair

A little care keeps the finish looking good. Our advice:

  • Wash away dyes and oils after use
  • Don’t use the bath until it has fully cured
  • Avoid suction-cup mats
  • Repair dripping taps early

Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.

Questions from Holmes

Can you redo someone else’s repair?

In most cases. The old repair comes out first.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Lancashire.

Is there a smell?

Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.

How durable is a resurfaced bath?

Look after it and it lasts. Avoid abrasive cleaners and suction mats.

How quickly can you book me in?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

What happens after I send photos?

We come back with a fixed price, plus dates. You’re under no obligation.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Can you make a coloured bath white?

Yes, most people go for white. Mention the colour you want when you send pictures.

What we do, step by step

Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes most of the day, and the room is left clean and tidy.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Preparing for the visit

  • Clear the area around the damage
  • Tell us about parking, stairs or access
  • Ensure the room can be ventilated

Getting a price

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.

Send pictures for a quote

Related advice

For landlords and businesses

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

If you manage property in Holmes, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.

Honest limits

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • A cast iron or steel bath that’s cracked right through
  • Plumbing leaks, which need a plumber
  • Problems we cannot see until an old finish comes off

If in doubt, send photos and we will say what we think.

Materials we work on in Holmes

  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays

Where we work around Holmes

Holmes is about 6 miles east of Southport, in Lancashire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. We work in all 482 towns and villages in Lancashire, from the larger towns to small villages. Our jobs stretch from Holmes to Liverpool (about 18 miles away).

All of PR4 is within our area. Jobs here include addresses on Green Lane, Higher Lane and Taylor's Lane and the roads around them. We also cover the places around Holmes: Mere Brow (1 mile west), Sollom (1 mile east), Tarleton (1 mile north-east), Mere Side (2 miles south) and Hundred End (2 miles north-west). Within a short drive, we also cover Preston (10 miles north-east), Chorley (9 miles east), Lytham St Anne's (8 miles north-west), Bamber Bridge (9 miles north-east), Leyland (7 miles east) and Fulwood (10 miles north-east).

Near you in Holmes

In Holmes, that means homes near Tarleton Academy and Bank Hall Gardens, among other places. For rail, the closest station is Rufford station, about 3.1 miles south-east. Further afield, we also cover the area around Greaves Hall (2.4 miles west). Open spaces near Holmes include Mere Sands Wood and Martin Mere.

Map of Holmes © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.