Lancashire · England
Bath re-enamelling & resurfacing in Mere Brow, Lancashire
Bath re-enamelling across Mere Brow and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
What a repair cannot fix
We won’t take on work that will not last, so here’s what a repair cannot put right:
- A bath that is rusted through
- Acrylic that moves when you stand in it
- A metal bath with a through crack
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
About our bath re-enamelling in Mere Brow
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. If you’re dealing with an original cast iron bath that needs restoring and thin, worn enamel in places, we can help.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Where
- Mere Brow (PR4)
- Region
- Lancashire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we’re called out for in Mere Brow
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
These are the problems we are asked about most:
- Thin, worn enamel in places
- A roll-top that’s seen better days
- A peeling or bubbling previous coating
- Stains that will not shift
What your quote should include
- What the guarantee covers, and for how long
- How long it needs to cure
- What protection goes down before work starts
- Whether a trained technician does the job
About Mere Brow
Mere Brow is about 5 miles east of Southport, in Lancashire. Customers in Mere Brow get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We cover 482 places across Lancashire, from the larger towns to small villages. Our nearest city page is Liverpool, about 18 miles away.
We work across the PR4 postcode area and the streets around it. From The Gravel, Cinder Lane and Pear Tree Close or anywhere nearby, a technician can come to you. We also travel to Holmes (1 mile east), Mere Side (2 miles south-east), Holmeswood (2 miles south-east), Hundred End (2 miles north) and Sollom (2 miles east). Larger places within reach include Preston (11 miles north-east), Chorley (10 miles east), Lytham St Anne's (8 miles north-west), Bamber Bridge (10 miles north-east), Leyland (8 miles east) and Fulwood (11 miles north-east).
Local landmarks in Mere Brow
We visit homes around Tarleton Mere Brow Church of England Primary School and Legh Arms. The nearest railway station is Bescar Lane station, roughly 3 miles south-west of the centre. Other landmarks nearby include Greaves Hall (1.6 miles north-west). The countryside around Mere Brow includes Martin Mere and Mere Sands Wood.
Repair or replace in Mere Brow?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
- A fixed quote before you book
Take a look at our pricing and bath cost comparison.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Places near Mere Brow
Also in Mere Brow
Landlords, agents and businesses in Mere Brow
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
The process
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes the best part of a day in most cases. The room is left tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
- Ensure the area is dry
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Read more
FAQs for Mere Brow
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do you come to Mere Brow?
Yes. We cover the whole UK and come to Mere Brow. Send us pictures for a fixed quote, or call 0345 017 0787.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How long will the bath be out of use?
Most baths are done in a day, ready the day after. We give you timings with the quote.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
About our accreditations · Every repair comes with a one-year guarantee.
