Warwickshire · England

Bath re-enamelling & resurfacing in Hurley, Warwickshire

Full bath re-enamelling and resurfacing in Hurley, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • A dull, rough surface that won’t come clean
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Hurley

Work for landlords and builders

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Bath re-enamelling at your home in Hurley

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for a bath in a colour that no longer suits and staining under the taps and around the waste, in Victorian roll-tops, pressed steel baths and cast iron baths.

Every repair comes with a one-year guarantee, wherever you are in Warwickshire.

Where
Hurley (CV9)
Region
Warwickshire
Cover
A year, on every repair
Quotes
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Signs you need bath re-enamelling in Hurley

Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

The most common problems we’re called about are:

  • Staining under the taps and around the waste
  • Enamel that is lost its shine and feels rough
  • A period or roll-top bath worth keeping
  • A coloured bath you want in white

What your quote should include

  • Whether there are any call-out or travel charges
  • What prep work is covered
  • What protection goes down before work starts
  • What the guarantee covers, and for how long

10 questions to ask before you book

Repairs by material

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Can I fix it myself?

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

When we would advise against a repair

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • An acrylic bath that flexes badly underfoot
  • Leaking taps or wastes (a plumber’s job)
  • Damage hidden under a previous coating, until it’s stripped back

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Hurley

  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths
  • Cast iron baths

How it works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Preparing for the visit

  • Point us to the nearest place to park
  • Tell us about any previous repairs or coatings
  • Tell us if there are stairs or a lift

Ask for a price

Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.

Send photos for a quote

Read more

Hurley and nearby

Hurley is about 5 miles south of Tamworth, in Warwickshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Hurley is one of 324 places in Warwickshire where we work. We work right across the region, from Hurley to Birmingham (about 12 miles away).

Our visits in CV9 work the same way as everywhere else we cover. Whether you live on Queensway, Knowle Hill and Bridge Street or anywhere nearby, we can come to you. We also cover the places around Hurley: Hurley Common (1 mile north), Wood End (1 mile north), Piccadilly (2 miles north-west), Kingsbury (2 miles west) and Botts Green (2 miles south). Within a short drive, we also cover Nuneaton (8 miles east), Bedworth (9 miles south-east), Kenilworth (15 miles south), Fordbridge (7 miles south-west), Atherstone (4 miles east) and Castle Vale (6 miles south-west).

Near you in Hurley

In Hurley, that means homes near Church of the Resurrection, Hurley Primary School and Kingsbury School. For rail, the closest station is Wilnecote station, about 3.8 miles north-west. Nearby you’ll also find Kingsbury Hall (1.7 miles west) and Sir Robert Peel Community Hospital (5.3 miles north-west). Green spaces nearby include Ladywalk Reserve.

Map of Hurley © OpenStreetMap contributors

Aftercare tips

It’s all simple stuff, just a few sensible habits:

  • A quick wipe after use keeps limescale away
  • Keep toiletries on a shelf rather than in the bath
  • Avoid suction-cup mats
  • Get any chip repaired quickly

The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.

Repairing versus replacing in Hurley

Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Prices start from £350. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

Why us?

  • A year’s guarantee on all work
  • Colours mixed by hand to suit your surface
  • Honest advice, even when it means no job
  • Fixed prices from your pictures

Take a look at our pricing and resurfacing vs replacement cost guide.

Questions from Hurley

What happens next?

We review the pictures and send a fixed quote with dates.

Do you work in Hurley?

Yes, we do. We send a technician to Hurley for every job, with no extra charge for travel.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Can you redo someone else’s repair?

Yes, regularly. It can add a little time, which we include in the quote.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Is there a call-out fee?

There is no separate call-out charge. Your fixed quote includes everything.

Will there be a smell?

It depends on the job, but frequently a little. Open windows and an extractor fan help.

How do I get a price for bath re-enamelling in Hurley?

Prices start from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.