Warwickshire · England
Bath re-enamelling & resurfacing in Illshaw Heath, Warwickshire
Bath re-enamelling for Illshaw Heath, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- Lots of chips and rust spots
- Worn patches where water runs and sits
How we price bath re-enamelling
Prices start from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- The material and finish
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Something in shot to show the size
- Where you are, by postcode
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
To get a price, send a couple of photos through our quote form or call us. We will say right away if a repair is the right fix.
About our bath re-enamelling in Illshaw Heath
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. We work on pressed steel baths, basins & shower trays and cast iron baths, and people most frequently call us about an outdated colour you’d like to change and an original cast iron bath that needs restoring.
Big or small, you get the same one-year guarantee.
- Location
- Illshaw Heath (B94)
- Area hub
- Warwickshire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Also near Illshaw Heath
Other services in Illshaw Heath
Looking after it afterwards
So the finish stays in good condition:
- Keep toiletries on a shelf rather than in the bath
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
- Repair dripping taps early
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
What we do, step by step
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a full day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the next day.
How to prepare
- Ensure the area is dry
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Your questions about bath re-enamelling in Illshaw Heath
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Which areas do you work in?
Everywhere in the UK, Illshaw Heath included. There’s no extra charge for travel.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
How long does re-enamelling take?
Typically one day, with the bath ready the following day. A badly pitted bath can need a second day.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Our work in Illshaw Heath
Illshaw Heath is about 3 miles south of Solihull, in Warwickshire. Anywhere in B94, a technician comes to you. Our technicians cover 324 places in Warwickshire. We work right across the region, from Illshaw Heath to Birmingham (about 8 miles away).
Postcode districts we cover here: B94. From Kineton Lane, Illshaw Heath Road and Dyers Lane or anywhere nearby, we can come to you. Neighbouring places we cover include Waring's Green (1 mile west), Cheswick Green (1 mile north-west), Earlswood (1 mile west), Terry's Green (2 miles west) and Dickens Heath (2 miles north-west). We also work in nearby towns such as Warwick (11 miles south-east), Royal Leamington Spa (13 miles south-east), Stratford-upon-Avon (13 miles south), Leamington Spa (13 miles south-east), Kenilworth (10 miles east) and Fordbridge (8 miles north).
What’s near Illshaw Heath
Our customers here include homes close to Malthouse Lane Park, Light Hall School and St Patricks Church of England Primary Academy, among other places. You will also find Blue Bell pub (within half a mile west) and Church of St Patrick (0.7 miles north-west). For rail, the closest station is The Lakes station, about 1.8 miles west of the centre. Further afield, we also cover the area around Earlswood Village Museum (0.9 miles west) and Solihull Hospital (3.7 miles north). Not far away are Henley Sidings.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Landlords, agents and businesses in Illshaw Heath
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams in Warwickshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
When we would advise against a repair
In fairness, there are a few things a repair won’t fix:
- A bath that’s rusted through
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Repairing versus replacing in Illshaw Heath
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Most jobs done in one visit
- Free fixed quotes from pictures
- A year’s guarantee on all work
- Dust sheets down, tidy finish
Read our prices page and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
