West Berkshire · England

Bath re-enamelling & resurfacing in Inkpen Common, West Berkshire

Full bath re-enamelling and resurfacing at your home in Inkpen Common, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • A roll-top that’s seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Inkpen Common

Repair or replace in Inkpen Common?

Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.

What you get with us

  • Straight answers about what a repair can do
  • Most jobs done in one visit
  • A year’s guarantee on all work
  • One price list for the whole UK

Read our pricing or resurfacing vs replacement cost guide.

About our bath re-enamelling in Inkpen Common

Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with a peeling or bubbling previous coating and an outdated colour you’d like to change, we can help, on Victorian roll-tops, pressed steel baths and cast iron baths alike.

Every repair comes with a one-year guarantee, wherever you are in West Berkshire.

Where
Inkpen Common (RG17, RG20)
County
West Berkshire
Warranty
A year, on every repair
Price
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Keeping it looking good

Most damage we see is avoidable. A few tips:

  • Avoid suction-cup mats
  • Keep toiletries on a shelf rather than in the bath
  • Get any chip repaired quickly
  • Leave the bath for the full curing time before using it

Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

Do you need bath re-enamelling in Inkpen Common?

A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.

Typical reasons for a call-out include:

  • Enamel that is lost its shine and feels rough
  • A coating lifting around the plughole
  • Wear marks under the taps
  • Stains that won’t shift

Questions to ask before booking

  • What prep work is covered
  • If travel is included in the price
  • How soon you can use it again
  • Whether they match the colour on site

10 questions to ask before booking

Landlords, agents and businesses in Inkpen Common

Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

We regularly work with letting and managing agents. Send the address, photos and access details and we’ll handle the rest.

Our work in Inkpen Common

Inkpen Common is about 6 miles west of Newbury, in West Berkshire. Customers in Inkpen Common get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Inkpen Common is one of 155 towns and villages in West Berkshire where we work. We work right across the region, from Inkpen Common to London (59 miles away).

All of RG17 and RG20 is covered. You’ll find streets such as Heads Lane, Rooksnest Lane and The Firs, and we cover them all. We also cover the places around Inkpen Common: Hell Corner (1 mile east), Inkpen (1 mile north-west), Upper Green (1 mile south-west), Lower Green (1 mile west) and Kintbury (2 miles north). Larger places within reach include Newbury (6 miles east), Thatcham (9 miles east), Speenhamland (6 miles east), Hungerford (4 miles north-west), Lambourn (10 miles north) and Shaw (7 miles east).

What’s near Inkpen Common

Typical jobs here are in homes near Inkpen Primary School, Church of St Laurence and Crown and Garter pub and the streets around them. For rail, the closest station is Kintbury station, about 2 miles north of the centre. A little further out are Hamstead Marshall 3 (3.1 miles north-east). Open spaces near Inkpen Common include Kintbury Newt Ponds and Inkpen Hill.

Map of Inkpen Common © OpenStreetMap contributors

What we cannot put right

It helps to know what we cannot do:

  • Leaks from fittings rather than the bath
  • Damage hidden under a previous coating, until it’s stripped back
  • A cast iron or steel bath that is cracked right through

If in doubt, send pictures and we’ll say what we think before booking.

What we work on

  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths

Should I try a DIY kit first?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.

How we price bath re-enamelling

Prices start from £350. There’s no charge for travel to Inkpen Common. The price depends on:

  • How hard the colour is to match
  • Any earlier repairs that need removing first
  • How many areas need work
  • The material

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Getting a price from pictures

Good pictures mean an accurate price. Here’s what we find most useful:

  • What it’s made of, if you know
  • Any earlier repairs or coatings
  • Daylight if possible, and no flash reflection
  • A coin or ruler next to the damage for scale

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.

What happens on the day

You don’t need to empty the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. It usually takes most of the day, and you’re welcome to carry on with your day while we work.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Preparing for the visit

  • Let us know about parking or access
  • Clear toiletries, mats and anything else from around the area
  • Tell us if there are stairs or a lift

Ask for a price

To get a price, send two or three pictures through our quote form or call us. We’ll say straight away whether it can be repaired.

Send photos for a quote

Advice

Common questions in Inkpen Common

Will there be fumes?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.

How durable is a resurfaced bath?

Care for it and it lasts. Gentle cleaning, no suction mats.

Can you redo someone else’s repair?

In most cases. The old repair comes out first, so mention it when you send pictures.

How much does bath re-enamelling cost in Inkpen Common?

Resurfacing from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across West Berkshire.

Can you resurface a pink bath in white?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

How soon can you come?

We will give you dates with your quote. Tell us if you need it done quickly.

Can a failed resurfacing be redone?

Usually, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.