Hampshire · England

Bath Re-enamelling for Vernham Street homes

Bath re-enamelling for Vernham Street, without a refit. Get a fixed price from your photos, then we come to you.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • A coating lifting around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Vernham Street

How the visit works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We clean up when we’re done and let you know when you can use it again.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

Before we arrive

  • Open a window if you can
  • Tell us if there are stairs or a lift
  • Let us know about parking or access

Get a quote

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Get a free quote

Read more

Bath re-enamelling in Vernham Street, done in place

After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Typical jobs include an original cast iron bath that needs restoring and thin, worn enamel in places, across Victorian roll-tops, basins & shower trays and acrylic baths.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Location
Vernham Street (SP11)
County
Hampshire
Guarantee
12 months on all our work
Quotes
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Landlords, agents and businesses in Vernham Street

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

For developers and builders, we fix damage before handover. Several plots can be done in one visit.

Vernham Street and nearby

Vernham Street is about 7 miles north of Andover, in Hampshire. Across the SP11 area, a technician comes to you. Vernham Street is one of 683 places in Hampshire we cover. You can also see our page for London, about 62 miles away.

Postcode districts we cover here: SP11. We also cover the places around Vernham Street: Test Valley (3 miles east), Upper Green (4 miles north), Ashmansworth (4 miles east), Lower Green (4 miles north) and Inkpen Common (4 miles north-east). We also work in nearby towns such as Andover (7 miles south), Tidworth (9 miles south-west), Ludgershall (7 miles south-west), Whitchurch (9 miles south-east), East Anton (6 miles south) and Oakley (15 miles east).

Near you in Vernham Street

Around Vernham Street, we work in homes near Vernham Dean Gillum's Church of England Primary School, The George Inn and Church of St Mary and the streets around them. Not far away are Combe Hill.

Map of Vernham Street © OpenStreetMap contributors

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

When a repair isn’t the answer

Some problems need a builder, plumber or fitter rather than us:

  • Leaks from fittings rather than the bath
  • Damage hidden under a previous coating, until it’s stripped back
  • An acrylic bath that flexes badly underfoot

If in doubt, send pictures and we’ll say what we think before you book.

What we work on

  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays

What affects the price in Vernham Street

Resurfacing from £350. There’s no charge for travel to Vernham Street. The price depends on:

  • Doing more than one item at once
  • The material and finish
  • Any earlier repairs that need removing first
  • The colour and finish to match

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Send photos for a quote

Almost every job we do is priced from pictures. This is what we need:

  • A coin beside the damage so we can judge size
  • Daylight if possible, and no flash reflection
  • What it’s made of, if you know
  • Where you are, by postcode

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Repair or replace: which is better?

Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.

Why book with us

  • Every repair guaranteed for a year
  • Repair technicians who travel to you, UK-wide
  • Free fixed quotes from pictures
  • Most jobs done in one visit

Take a look at our full price list or resurfacing vs replacement cost guide.

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

What we’re called out for in Vernham Street

Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.

It’s worth getting a quote if you see:

  • Enamel that is lost its shine and feels rough
  • A coloured bath you want in white
  • An old resurfacing that is failing
  • Lots of chips and rust spots

What your quote should include

  • What protection goes down before work starts
  • How the colour is matched
  • Whether there are any call-out or travel charges
  • What aftercare is recommended

Our hiring checklist

Vernham Street questions

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

What does bath re-enamelling cost?

Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up and a picture of the entire item with your SP11 postcode.

Can you do the outside of a roll-top?

Yes. Inside and out if you’d like.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can I add another job to the visit?

Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.

Do you need to take the bath out?

Not at all. We work on the bath in place, with the room protected and ventilated.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Can pets and children be at home?

Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.