West Berkshire · England

Bath Re-enamelling for Inkpen homes

Damaged bath in Inkpen? We repair it in place, mix the colour on the day and guarantee the work for a year.

  • Resurfacing from £350
  • A roll-top that is seen better days
  • Stains that will not shift
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Inkpen

Common problems we fix in Inkpen

Often the bath has just had decades of use. Underneath, a cast iron or steel bath is normally as strong as ever.

Typical reasons for a call-out include:

  • An outdated colour you’d like to change
  • Chips and rust in more than one place
  • A dull, rough surface that will not come clean
  • Worn patches where water runs and sits

What to look for in a quote

  • What happens if the damage is worse than the photos show
  • Whether there are any call-out or travel charges
  • Whether a trained technician does the job
  • Whether cleaning and preparation are in the price

How to compare quotes

Bath re-enamelling in Inkpen without replacing anything

Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. We’re frequently asked to fix an outdated colour you’d like to change and an old resurfacing that’s failing, on Victorian roll-tops, acrylic baths and pressed steel baths.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.

Technician in a mask working on a freestanding roll-top bath
Where
Inkpen (RG17)
Region
West Berkshire
Warranty
One year on every repair
Quote
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

What affects the price in Inkpen

Resurfacing from £350. We price every job individually. What matters most is:

  • The size and number of damaged areas
  • The material and finish
  • Access to the area
  • The type of damage

Our prices are the same across the UK, so there’s no premium for Inkpen. What changes the price is the job itself: how much damage, what it’s made of and how many items.

How to get a fixed quote

Before you send pictures, these tips help us give you a firm price:

  • A picture taken from further back
  • Whether it’s been repaired or coated before
  • A clear, close picture of the problem area
  • A coin or ruler next to the damage for scale

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.

Inkpen: your questions answered

How much does bath re-enamelling cost in Inkpen?

Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.

Can a failed resurfacing be redone?

Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.

Will there be fumes?

Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.

Can you re-enamel a roll-top bath?

Yes. Inside and out if you’d like.

Can you resurface a pink bath in white?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

How soon can you come?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

How long is the bath unusable?

One day for most baths and can be used the day after. We give you timings with the quote.

Can pets and children be at home?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

What happens on the day

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We clean up when we’re done and let you know when you can use it again.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the following day.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Mention any parking restrictions or tricky access
  • Let us know which floor the room is on

Ask for a price

Upload pictures of the damage and one of the whole item, and tell us you’re in Inkpen, and we’ll reply with a fixed price.

Get a fixed quote

Related advice

What a repair cannot fix

We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:

  • A metal bath with a through crack
  • Holes rusted through the metal
  • Anything hidden under an old coating, until we remove it

If in doubt, send photos and we’ll say what we think before booking.

What we work on

  • Basins & shower trays
  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths

Keeping it looking good

Aftercare is simple, and it makes a real difference:

  • Clean with a soft cloth and mild detergent
  • Keep suction mats out of the bath
  • Respect the curing time we give you
  • Dry the bath after use to stop limescale

Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

Do not try to scrub a worn bath back to shine. It just wears the enamel further.

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Inkpen and nearby

Inkpen is about 6 miles west of Newbury, in West Berkshire. Wherever you are in the RG17 postcode area, we carry out the work at your property. We work in all 155 towns and villages in West Berkshire. We work right across the region, from Inkpen to London (60 miles away).

Jobs in RG17 are booked in the same way as anywhere else. Jobs here include addresses on Folly Road, Post Office Road and Robins Hill. Neighbouring places we cover include Inkpen Common (1 mile south-east), Upper Green (1 mile south), Hell Corner (1 mile east), Lower Green (1 mile west) and Kintbury (2 miles north-east). We also work in nearby towns such as Newbury (6 miles east), Thatcham (9 miles east), Speenhamland (6 miles east), Hungerford (3 miles north-west), Lambourn (9 miles north) and Shaw (7 miles east).

Landmarks near Inkpen

Around Inkpen, we work in homes near Crown and Garter pub, Inkpen Primary School and Church of St Michael. The nearest railway station is Kintbury station, about 1.9 miles north-east. Nearby you will also find Hamstead Marshall 3 (3.3 miles north-east). Green spaces nearby include Kintbury Newt Ponds and Inkpen Hill.

Map of Inkpen © OpenStreetMap contributors

Landlords, agents and businesses in Inkpen

If you manage property in Inkpen, we’ll quote for several properties at once. Send pictures for each one and we will price them together.

Housing associations and facilities teams use us for planned and reactive repairs in West Berkshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Why repair rather than replace?

Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

Why choose Surface Doctor in Inkpen

  • Everything repaired in place
  • One price list for the whole UK
  • We come to you, anywhere in the UK
  • One visit for most repairs

Read our prices page and guide to resurfacing and replacement costs.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.