East Lothian · Scotland
Bath Re-enamelling for Inveresk homes
Full bath re-enamelling and resurfacing at your home in Inveresk, with a one-year guarantee on every repair.
- Resurfacing from £350
- Stains that won’t shift
- Thin, worn enamel in places
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Bath re-enamelling in Inveresk, done in place
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Common call-outs are for an outdated colour you’d like to change and thin, worn enamel in places, across acrylic baths, Victorian roll-tops and basins & shower trays.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Area
- Inveresk (EH21)
- County
- East Lothian
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Inveresk
Also in Inveresk
Looking after it afterwards
To keep it looking its best for years:
- Rinse off hair dye, oils and bath bombs straight away
- Respect the curing time we give you
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
About Inveresk
Inveresk is about 1 mile south-east of Musselburgh, in East Lothian. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Inveresk is one of 48 places in East Lothian where we work. Our nearest city page is Edinburgh, about 6 miles away.
Our visits in EH21 are booked in the same way as anywhere else. We regularly work on streets such as Park Lane, Inveresk Road and Carberry Road and the roads around them. Inveresk sits on or near the A6124, so getting to you is simple. Nearby, we also work in Musselburgh (1 mile north-west), Whitecraig (1 mile south), Old Craighall (1 mile south-west), Wallyford (1 mile east) and Carberry (1 mile south-east). We also work in nearby towns such as Haddington (10 miles east), Tranent (4 miles east), North Berwick (15 miles north-east), Prestonpans (3 miles north-east), Cockenzie and Port Seton (4 miles north-east) and Longniddry (6 miles north-east).
Local landmarks in Inveresk
Around Inveresk, we work in homes near 58 High Street pub, St Michael’s Kirk and Loretto School, among other places. The closest station to Inveresk is Musselburgh station, about 1 mile west of the centre. Other landmarks nearby include Royal Infirmary of Edinburgh (3.6 miles west) and Musselburgh Doll Museum (0.5 miles north-west). Open spaces near Inveresk include The New Leaf Co-op and Whinny Hill.
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Inveresk. What changes the price is:
- Doing more than one item at once
- What the surface is made of
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from pictures
Photographing the damage takes a minute. Please include:
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- Your postcode, so we can check dates
To get a price, send two or three photos using our quote form or call us. We’ll say right away if a repair is the right fix.
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- No extra charge for your area
- CHAS and Constructionline accredited
- We leave the room as we found it
- Straight answers about what a repair can do
See our prices page and resurfacing vs replacement cost guide.
Common problems we fix in Inveresk
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Keep an eye out for any of the following:
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- A peeling or bubbling previous coating
Before booking anyone
- Whether the price is fixed and includes VAT
- Whether the colour is mixed to match
- How soon you can use it again
- If travel is included in the price
Landlord and trade work in Inveresk
If you manage property in Inveresk, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
What a repair can’t fix
We would rather lose a job than do one that will not last, so these are the limits:
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Inveresk: your questions answered
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Inveresk.
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How the visit works
We begin by going over the job with you. After that, protection goes down around the work area and the work begins. It normally takes most of the day, and we will keep you posted as we go.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention if the room is upstairs or in a flat
- Tell us about parking, stairs or access
- Have a window or extractor fan available
Ask for a price
For a price in Inveresk, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
