Staffordshire · England

Bath Re-enamelling for Ipstones homes

Full bath re-enamelling and resurfacing in Ipstones, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • Wear marks under the taps
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Ipstones

How we price bath re-enamelling

Prices start from £350. Quotes are free and the price is fixed. What we take into account:

  • The type of damage
  • Access to the area
  • The colour and finish to match
  • Whether old repairs or coatings need taking off

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

How to get a fixed price

Good photos mean an accurate price. Here’s what we find most useful:

  • A photo taken from further back
  • Where you are, by postcode
  • A coin or ruler next to the damage for scale
  • A clear, close picture of the problem area

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.

About our bath re-enamelling in Ipstones

Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Common call-outs are for a roll-top that’s seen better days and an old resurfacing that’s failing, on Victorian roll-tops, acrylic baths and basins & shower trays.

Every job is backed for twelve months. We return to put right any problem with the work.

Basin with yellowed glaze resurfaced to a clean white finish
Area
Ipstones (ST10)
County
Staffordshire
Warranty
12 months on all our work
Price
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026

How it works

When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a full day. We tidy up before we leave and tell you when it’s ready to use.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Before we arrive

  • Keep a parking space free if you can
  • Let us know which floor the room is on
  • Make sure the room can be ventilated

Ask for a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Read more

Repair or replace: which is better?

If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Why choose Surface Doctor in Ipstones

  • Technicians who travel to you, UK-wide
  • Accredited with CHAS, Constructionline and SafeContractor
  • Fixed prices from your photos
  • One visit for most repairs

Take a look at our prices page and guide to resurfacing and replacement costs.

Materials and what they mean for the repair

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

Looking after it afterwards

Simple care helps the repair last. Our advice:

  • Store bottles off the bath
  • Never use suction bath mats
  • Do not use the bath until it has fully cured
  • Have chips seen to early

Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.

Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.

What we cannot put right

It helps to know what we cannot do:

  • Plumbing leaks, which need a plumber
  • Damage hidden under a previous coating, until it’s stripped back
  • A metal bath with a through crack

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Ipstones

  • Pressed steel baths
  • Cast iron baths
  • Basins & shower trays
  • Victorian roll-tops
  • Acrylic baths

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.

Ipstones and the surrounding area

Ipstones is about 4 miles north of Cheadle, in Staffordshire. Customers in Ipstones get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We cover 512 places in Staffordshire, from the larger towns to small villages. You can also see our page for Manchester, about 32 miles away.

All of ST10 is covered. You will find streets such as High Street, Brookfields Road and St Leonard's Avenue, all of which we cover. We also cover the places around Ipstones: Coltstone (1 mile north-west), Froghall (1 mile south), Hazles Cross (2 miles south-west), Blakelow (2 miles north-east) and Kingsley (2 miles south). Larger places within reach include Newcastle-under-Lyme (11 miles west), Longton (8 miles south-west), Stone (13 miles south-west), Leek (5 miles north-west), Biddulph (10 miles north-west) and Alsager (15 miles west).

Near you in Ipstones

Our clients here include homes close to Church of St Leonard, Sea Lion Inn and St Leonard's CofE (VA) First School and the streets around them. Nearby you’ll also find St Edward's Hospital (3.8 miles north-west) and Nursing History Museum (3.8 miles north-west). Green spaces nearby include Harston Wood.

Map of Ipstones © OpenStreetMap contributors

FAQs for Ipstones

What does bath re-enamelling cost?

Resurfacing from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo with your ST10 postcode.

Is my repair covered?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

What areas do you cover?

Across the UK, so Ipstones is covered. Prices don’t change with location.

Will there be fumes?

Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.

What happens after I send photos?

We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

How long does re-enamelling last?

That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.

Landlords, agents and businesses in Ipstones

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.