Staffordshire · England
Bath re-enamelling & resurfacing in Kingsley, Staffordshire
Bath re-enamelling in and around Kingsley: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An old resurfacing that’s failing
- A period or roll-top bath worth keeping
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes the best part of a day. If anything looks different from your photos, we will talk to you before going ahead.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Preparing for the visit
- Let us know about parking or access
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
How to get a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
Bath re-enamelling at your home in Kingsley
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for a bath that stays dull however much you clean it and an old resurfacing that’s failing, on pressed steel baths, acrylic baths and basins & shower trays.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Kingsley (ST10)
- County
- Staffordshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
It’s all simple stuff:
- Repair dripping taps early
- Never use suction bath mats
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About Kingsley
Kingsley is about 2 miles north of Cheadle, in Staffordshire. Our repair technicians come to homes and businesses in Kingsley and the surrounding area, so there is no workshop to go to. Kingsley is one of 512 towns and villages in Staffordshire we cover. We work right across the region, from Kingsley to Manchester (33 miles away).
Here we cover the ST10 postcode area. Local streets include High Street, Johnson Crescent and Wood Avenue, and we cover them all. We also travel to Hazles Cross (1 mile north), Kingsley Holt (1 mile east), Froghall (1 mile north-east), Whiston (2 miles east) and Ipstones (2 miles north). Further out, we also cover Newcastle-under-Lyme (10 miles west), Longton (6 miles west), Stone (11 miles south-west), Leek (6 miles north), Biddulph (10 miles north-west) and Alsager (14 miles west).
Near you in Kingsley
Typical jobs here are in homes near Wolstanton Grammar School, Church of St Werburgh and St Werburgh's CE (A) Primary School and the streets around them. Kingsley’s nearest station is Blythe Bridge station, about 4.8 miles south-west of the centre. Further afield, we also cover the area around Alton Castle (4.8 miles south-east) and Cheadle Hospital (2.4 miles south). For a walk, there is Harston Wood.
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Colour mixed on the day to match
- Nothing taken out or refitted
- No extra charge for your area
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page and bath cost comparison.
Do you need bath re-enamelling in Kingsley?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Look out for these signs:
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- A coloured bath you want in white
- Brown or grey marks that do not clean off
Questions to ask before you book
- What aftercare is recommended
- The length of the guarantee and what it covers
- How your room will be protected
- A fixed price, and whether VAT is included
What we can’t put right
To be straight with you, some problems need a different fix:
- A bath split right through the body
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Kingsley
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
What bath re-enamelling costs
Resurfacing from £350. You will know the full cost before you book. We take into account:
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
Most quotes are done from pictures alone. To help us price it:
- A picture taken from further back
- A close-up of the damage, in focus
- Any details about the material
- Any earlier repairs or coatings
Upload a picture of the damage and a wider shot of the whole item, with your ST10 postcode, and we’ll reply with a fixed quote.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Staffordshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.
Nearby places to Kingsley
What else we do in Kingsley
Common questions in Kingsley
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What happens next?
We review the pictures and send a fixed quote with dates.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Which areas do you work in?
The whole UK, including all of Staffordshire. Send your postcode with your pictures and we will offer you dates.
How much does bath re-enamelling cost in Kingsley?
Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
About our accreditations · Every repair comes with a one-year guarantee.
