Wirral · England
Bath re-enamelling & resurfacing in Irby Hill, Wirral
Local bath re-enamelling for Irby Hill: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Several chips and rust patches
About our bath re-enamelling in Irby Hill
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. It avoids removal, plumbing and re-tiling. Typical jobs include an outdated colour you’d like to change and stains that won’t shift, on cast iron baths, Victorian roll-tops and pressed steel baths.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.
- Where
- Irby Hill (CH61, CH48)
- Area hub
- Wirral
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
Looking after the surface is easy:
- Dry the bath after use to stop limescale
- Store bottles off the bath
- Get any chip repaired quickly
- Avoid suction-cup mats
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
The process
Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and we start. Allow the best part of a day, and we’ll keep you posted as we go.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
How to prepare
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
- Let us know if it has been repaired before
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Why repair rather than replace?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. Our prices are the same across the UK, so there is no premium for Irby Hill. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
- Repair technicians who travel to you, UK-wide
Take a look at our prices page or guide to resurfacing and replacement costs.
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- The material
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
A repair is priced on what needs doing, not where you live. You will see the full price before you book, with nothing added on the day.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- Where you are, by postcode
- Details of any past repairs
- A picture taken from further back
- Good light, ideally daylight, without flash glare
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
What we can’t put right
We will always be straight with you, so here’s what a repair cannot fix:
- Leaks from fittings rather than the bath
- A bath that’s rusted through
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
FAQs for Irby Hill
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Which areas do you work in?
We work UK-wide, so Irby Hill is covered. Prices don’t change with location.
Are there extra charges for Irby Hill?
No. Our quotes include travel, and we charge the same wherever you are.
What happens after I send photos?
We come back with a fixed quote. There is no obligation to book.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you work in Irby Hill?
Yes. We work across the UK and come to Irby Hill. Send us pictures for a fixed quote, or call 0345 017 0787.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Also near Irby Hill
Other services in Irby Hill
Covering Irby Hill
Irby Hill is about 2 miles east of West Kirby, in Wirral. We travel to clients in Irby Hill and the surrounding area, so nothing has to leave your home. Irby Hill is one of 44 towns and villages in Wirral we cover. We work right across the region, from Irby Hill to Liverpool (about 9 miles away).
Postcode districts we cover here: CH61 and CH48. Whether you live on Sandy Lane North, Mill Hill Road and Hillbark Road or a nearby road, we can come to you. We also travel to Frankby (1 mile north-west), Thurstaston (1 mile south), Greasby (1 mile north), Larton (1 mile north-west) and Newton (1 mile north-west). Further out, we also cover Birkenhead (3 miles north-east), Wallasey (5 miles north-east), Bebington (6 miles east), Moreton (3 miles north), Bromborough (6 miles east) and Lower Bebington (5 miles east).
Landmarks near Irby Hill
We visit homes around Irby Mill pub, Royden Park and Hilbre High School, among other places. You’ll also find Greasby Junior School (0.5 miles north) and St Chad's (0.8 miles south-east). Irby Hill’s nearest station is Upton station, about 2.3 miles north-east. Nearby you will also find Heswall cum Oldfield (2.4 miles south) and Leasowe Castle (3.8 miles north). Green spaces nearby include New Ferry Butterfly Park and West Kirby Marine Lake.
About our accreditations · Every repair comes with a one-year guarantee.
