Wirral · England
Bath re-enamelling & resurfacing in Frankby, Wirral
Local bath re-enamelling for Frankby: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A coloured bath you want in white
Bath re-enamelling in Frankby, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. If you’re dealing with an old resurfacing that’s failing and staining under the taps and around the waste, we can typically put it right.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.
- Location
- Frankby (CH48)
- County
- Wirral
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. We give every job a fixed price from photos. This is what makes a difference:
- The material
- Doing more than one item at once
- Unusual colours or finishes
- Where the damage is and how we get to it
We charge the same wherever you are, so there is no premium for Frankby. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
Two or three clear pictures are usually enough. Try to include:
- Any details about the material
- Natural light rather than flash
- Any earlier repairs or coatings
- One sharp close-up of the damage
If you are in Frankby and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Also near Frankby
What else we do in Frankby
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The process
Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes a full day in most cases. We leave the room clean.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
- Let us know about parking or access
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Advice
Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Colour mixed on the day to match
- One price list for the whole UK
- Fixed prices from your pictures
- Most jobs done in one visit
Take a look at our pricing or bath cost comparison.
What we cannot put right
To be straight with you, there are a few things a repair won’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
- A bath that’s rusted through
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Work for landlords and builders
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We regularly work with letting and managing agents. Send the address, photos and access details.
Common problems we fix in Frankby
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
The most common problems we’re called about are:
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
- An old resurfacing that’s failing
- A period or roll-top bath worth keeping
Questions to ask before you book
- How to look after the finish
- Whether a trained technician does the job
- What preparation is included
- What happens if they find more damage
Where we work around Frankby
Frankby is about 2 miles east of West Kirby, in Wirral. Whether you’re in the middle of Frankby or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Frankby is one of 44 places in Wirral where we work. Our nearest city page is Liverpool, about 9 miles away.
Postcode districts we cover here: CH48. Whether you live on Frankby Road, The Nook and Farriers Way or a nearby road, a technician can come to you. Main roads around Frankby include the B5139, so getting to you is simple. If you are just outside Frankby, we cover Larton (1 mile west), Greasby (1 mile north-east), Newton (1 mile west), Irby Hill (1 mile south-east) and Saughall Massie (1 mile north-east). Larger places within reach include Birkenhead (4 miles east), Wallasey (5 miles north-east), Bebington (6 miles east), Heswall (3 miles south-east), Bromborough (7 miles east) and Noctorum (3 miles east).
What’s near Frankby
In Frankby, that means homes near Hilbre High School, Greasby Infant School and Royden Park, among other places. You will also find Farmers Arms (within half a mile south) and Church of St John the Divine (under half a mile north-east). The closest station to Frankby is West Kirby station, about 2 miles west. A little further out are West Kirby Museum (1.7 miles west) and Leasowe Castle (3.4 miles north). Not far away are Bidston Hill and West Kirby Marine Lake.
Questions from Frankby
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do you cover the entire of Wirral?
Across the UK, and that includes Frankby. Our prices are the same everywhere.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up and a photo of the whole item and your postcode.
How long will the bath be out of use?
Usually one day, with the bath ready the next day. A badly pitted bath can need a second day.
About our accreditations · Every repair comes with a one-year guarantee.
