East Sussex · England
Bath Re-enamelling for Jury's Gap homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Jury's Gap. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Several chips and rust patches
- A dull, rough surface that won’t come clean
Common problems we fix in Jury's Gap
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
The most common problems we’re called about are:
- Brown or grey marks that do not clean off
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
- A dull, rough surface that won’t come clean
What to look for in a quote
- The length of the guarantee and what it covers
- What protection goes down before work starts
- Whether the price is fixed and includes VAT
- How soon you can use it again
Bath re-enamelling at your home in Jury's Gap
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on basins & shower trays, pressed steel baths and Victorian roll-tops, and people most frequently call us about stains that won’t shift and a period or roll-top bath worth keeping.
Every job is backed for twelve months. We return to put right any problem with the work.
- Area
- Jury's Gap (TN31)
- County
- East Sussex
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Jury's Gap and the surrounding area
Jury's Gap is about 12 miles east of Hastings, in East Sussex. Jobs in Jury's Gap are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We work in all 289 towns and villages in East Sussex. We work right across the region, from Jury's Gap to London (56 miles away).
Our technicians cover all of TN31 and the streets around it. Other places close to Jury's Gap include Camber (2 miles west), Rye Harbour (3 miles west), Lydd (4 miles north-east), East Guldeford (4 miles north-west) and Rye (4 miles west). Within a short drive, we also cover Hastings (12 miles west), St Leonards (13 miles south-west), Hastings Old Town (11 miles south-west), Belmont (11 miles south-west), Hollington (13 miles west) and Ore (10 miles west).
Local landmarks in Jury's Gap
Jury's Gap’s nearest station is Rye station, about 4.5 miles west. Well-known places in the area include Lydd Town Museum (3.8 miles north-east) and Camber Castle (4.1 miles west). Green spaces nearby include Burnthouse Pen and Rye Harbour Nature Reserve.
When a repair isn’t the answer
To be straight with you, there are a few things a repair will not fix:
- A bath split right through the body
- Leaks from fittings rather than the bath
- Holes rusted through the metal
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Jury's Gap
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
How to look after the repair
Most damage we see is avoidable. These habits help:
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- Don’t let dyes or oils sit on the finish
- Never use suction bath mats
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Also near Jury's Gap
Other services in Jury's Gap
How the visit works
We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes most of the day, and we leave the room as we found it.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Questions from Jury's Gap
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you do the outside of a roll-top?
Yes. Inside and out.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
How long does re-enamelling take?
Typically one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can you quote from pictures?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Can I fix it myself?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Repair or replace in Jury's Gap?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why Jury's Gap clients choose us
- No need to remove anything
- CHAS and Constructionline accredited
- One visit for most repairs
- We will tell you if it’s not worth repairing
Read our pricing or resurfacing vs replacement cost guide.
How we price bath re-enamelling
Prices start from £350. We give every job a fixed price from photos. This is what makes a difference:
- The type of damage
- The colour and finish to match
- How easy the damage is to reach
- The material
We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
Phone photos are fine. Ensure they show:
- The postcode, so we can plan the visit
- The material, if you know it
- A clear, close picture of the problem area
- Natural light rather than flash
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
About our accreditations · Every repair comes with a one-year guarantee.
