Glasgow · Scotland

Bath Re-enamelling for Kelvinhaugh homes

Damaged bath in Kelvinhaugh? We repair it in place, mix the colour on the day and guarantee the work for a year.

  • Resurfacing from £350
  • Several chips and rust patches
  • A period or roll-top bath worth keeping
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Kelvinhaugh?

About our bath re-enamelling in Kelvinhaugh

Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Typical jobs include worn patches where water runs and sits and an old resurfacing that’s failing, in cast iron baths, Victorian roll-tops and pressed steel baths.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Area
Kelvinhaugh (G3, G11, G51)
Region
Glasgow
Warranty
12 months on all our work
Quote
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Do you need bath re-enamelling in Kelvinhaugh?

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

The most common problems we are called about are:

  • A bath that stays dull however much you clean it
  • A bath in a colour that no longer suits
  • An old resurfacing that’s failing
  • Stains that won’t shift

What to look for in a quote

  • What prep work is covered
  • Aftercare advice
  • How your room will be protected
  • Who will actually do the work

Our hiring checklist

How we price bath re-enamelling

Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:

  • Previous DIY repairs that have to come out
  • The material and finish
  • Doing more than one item at once
  • Unusual colours or finishes

There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Send pictures for a quote

It only takes a minute to photograph the damage. Try to send:

  • What it’s made of, if you know
  • A wider photo showing the whole bath
  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed price, not an estimate.

Honest limits

In fairness, there are a few things a repair won’t fix:

  • Damage hidden under a previous coating, until it’s stripped back
  • A bath split right through the body
  • Acrylic that moves when you stand in it

If in doubt, send pictures and we’ll say what we think before booking.

Materials we work on in Kelvinhaugh

  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths

Aftercare tips

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • A quick wipe after use keeps limescale away
  • Avoid suction-cup mats
  • Rinse off hair dye, oils and bath bombs right away
  • Fix dripping taps quickly

Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.

Don’t try to scrub a worn bath back to shine. It just wears the enamel further.

Kelvinhaugh and the surrounding area

Kelvinhaugh is about 1 mile north-west of Glasgow, in Glasgow. Jobs in Kelvinhaugh are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We cover 183 places across Glasgow, from the larger towns to small villages.

Here we cover the G3, G11 and G51 postcode area. Whether you live on Govan Road, Haugh Road and Ferry Road or anywhere nearby, we can come to you. Other places close to Kelvinhaugh include Finnieston (1 mile south-east), Kelvingrove (1 mile east), Yorkhill (1 mile north), Sandyford (1 mile east) and Cessnock (1 mile south). Within a short drive, we also cover Langside (3 miles south), Yoker (4 miles north-west), Mount Florida (3 miles south-east), Hillpark (3 miles south), Merrylee (4 miles south) and Muirend (4 miles south).

Landmarks near Kelvinhaugh

Typical jobs here are in homes near St Vincent Street Church, Glasgow University Library and Kelvingrove Park, among other places. You will also find Sandyford Henderson Memorial Church (less than half a mile east), Glasgow Gaelic School (0.5 miles east), Curlers Rest pub (0.8 miles north) and Church Street Primary School (0.5 miles north). Kelvinhaugh has its own railway station: Exhibition Centre station. Other landmarks nearby include Royal Hospital for Sick Children (within half a mile north-west) and Glasgow Museum of Transport (within half a mile north). For a walk, there is Castle Hill and Kilmardinny.

  • Local schools include St Peter's Boys School (0.7 miles north-west)
Map of Kelvinhaugh © OpenStreetMap contributors

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Repair or replace in Kelvinhaugh?

Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the entire surface with the bath left where it is. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with no extras added later.

Why book with us

  • Free fixed quotes from pictures
  • A year’s guarantee on all work
  • No need to remove anything
  • CHAS and Constructionline accredited

See our pricing or guide to resurfacing and replacement costs.

How the visit works

Your technician turns up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take a full day, and we leave the room as we found it.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Have a window or extractor fan available
  • Point us to the nearest place to park
  • Clear toiletries, mats and anything else from around the area

How to get a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.

Send photos for a quote

Advice

Materials and what they mean for the repair

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Questions from Kelvinhaugh

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

Can you repair several things at once?

Of course, and it typically saves money. Send pictures of everything together and you will get one combined price.

Can you do the outside of a roll-top?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

Do you work in Kelvinhaugh?

We do. Technicians travel to Kelvinhaugh from across the region, with no extra charge for travel.

Can you repair something that is been repaired before?

In most cases. We remove the old repair before doing a new one, so mention it when you send photos.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

What happens if you find more damage?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.