Coventry · England

Bath Re-enamelling in Keresley

Local bath re-enamelling for Keresley: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • A coloured bath you want in white
  • Brown or grey marks that don’t clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Keresley?

Bath re-enamelling in Keresley, done in place

A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We regularly repair pressed steel baths, cast iron baths and Victorian roll-tops, and common reasons people contact us are a bath in a colour that no longer suits and stains that won’t shift.

We stand behind the work with a one-year guarantee.

Where
Keresley (CV6, CV5)
Area hub
Coventry
Cover
12 months on all our work
Price
From £350. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old basin refinished to bright white

The process

We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a full day. The room is left tidy and ready to use once it has cured.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Have somewhere for us to park nearby if possible
  • Mention if the room is upstairs or in a flat

Get a quote

Upload a picture of the damage and one of the entire item, and tell us you are in Keresley, and we’ll reply with a fixed price.

Get a fixed quote

Read more

Prices and what affects them

Prices start from £350. We give every job a fixed quote from photos. These are the things that affect it:

  • The material
  • How easy the damage is to reach
  • Unusual colours or finishes
  • Any earlier repairs that need removing first

There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from pictures

A couple of clear pictures is all it takes. It helps if you send:

  • Good light, ideally daylight, without flash glare
  • One picture of the entire bath
  • A coin or ruler next to the damage for scale
  • Whether it’s been repaired or coated before

Most customers in Keresley get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

What your bath is made of matters

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Landlord and trade work in Keresley

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Our work in Keresley

Keresley is about 2 miles north-west of Coventry, in Coventry. Jobs in Keresley are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We work in all 88 towns and villages in Coventry. We work right across the region, from Keresley to Birmingham (15 miles away).

Postcode districts we cover here: CV6 and CV5. We regularly work on streets such as Waste Lane, Hardy Road and Bruce Road. Neighbouring places we cover include Whitmore Park (1 mile north-east), Coundon (1 mile south), Brownshill Green (1 mile north-west), Daimler Green (1 mile south-east) and Holbrooks (1 mile north-east). Further out, we also cover Ernesford Grange (4 miles south-east), Foleshill (3 miles east), Wood End (3 miles east), Bell Green (3 miles east), Cheylesmore (3 miles south-east) and Ball Hill (3 miles south-east).

Near you in Keresley

In Keresley, that means homes near Coundon Court, Church of St Thomas and Bablake School. Other local landmarks include The Pilot Public House (0.7 miles east), Keresley Grange Primary School (within half a mile north) and Allesley Park (1.5 miles south-west). The nearest railway station is Coventry Arena station, about 1.9 miles north-east of the centre. Further afield, we also cover the area around Allesley Castle (1.6 miles south-west) and Arena Park Shopping Centre (1.9 miles north-east).

Map of Keresley © OpenStreetMap contributors

Should you replace it?

When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Why choose Surface Doctor in Keresley

  • CHAS and Constructionline accredited
  • Everything repaired in place
  • One visit for most repairs
  • No extra charge for your area

Read our full price list or resurfacing vs replacement cost guide.

Questions from Keresley

What information do you need?

Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.

Does the bath have to be removed?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

Can you redo someone else’s repair?

Generally, yes. Tell us what was done before.

How do I get a price for bath re-enamelling in Keresley?

Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Is my repair covered?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

Do the materials smell?

Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.

What happens after I send pictures?

We check the damage, the material and your postcode, then reply with a quote with dates.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Looking after it afterwards

It’s all simple stuff:

  • Respect the curing time we give you
  • A dripping tap should be fixed promptly
  • Rinse off hair dye, oils and bath bombs straight away
  • Wipe the bath dry after use in hard water areas

Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.

When a repair is not the answer

Some jobs are not right for a repair, for example:

  • A poorly supported acrylic bath, until it’s firmed up
  • Leaks from fittings rather than the bath
  • Steel that has corroded right through

If in doubt, send pictures and we will say what we think.

Materials we work on in Keresley

  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths

What we are called out for in Keresley

In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.

You may need us if you’ve spotted any of these:

  • An original cast iron bath that needs restoring
  • Enamel that is lost its shine and feels rough
  • Brown or grey marks that don’t clean off
  • A coating lifting around the plughole

Comparing quotes

  • What prep work is covered
  • The length of the guarantee and what it covers
  • Who will actually do the work
  • Whether there are any call-out or travel charges

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.