Stirling · Scotland
Bath re-enamelling & resurfacing in Killin, Stirling
Full bath re-enamelling and resurfacing at your home in Killin, with a one-year guarantee on every repair.
- Resurfacing from £350
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
FAQs for Killin
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
About our bath re-enamelling in Killin
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. If you’re dealing with thin, worn enamel in places and brown or grey marks that don’t clean off, we can help.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Killin (FK21)
- County
- Stirling
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
Not sure? Send photos and we will give you a straight answer.
What we work on
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- Colours mixed by hand to suit your surface
- Dust sheets down, tidy finish
- Most jobs done in one visit
- No extra charge for your area
Read our pricing and bath cost comparison.
Keeping it looking good
Once the work has cured, treat it gently:
- Rinse off hair dye, oils and bath bombs straight away
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
- Wipe the bath dry after use in hard water areas
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
How the visit works
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes the best part of a day, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
- Move bottles, mats and clutter away from the area
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Advice
What affects the price in Killin
Resurfacing from £350. We price every job individually, from your pictures. The main factors are:
- Where the damage is and how we get to it
- How hard the colour is to match
- What kind of damage it is
- Whether old repairs or coatings need taking off
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Send pictures for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Whether it’s been repaired or coated before
- The material, if you know it
- Natural light rather than flash
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Places near Killin
What else we do in Killin
Killin and nearby
Killin is about 28 miles north-west of Stirling, in Stirling. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 55 places in Stirling, from the larger towns to small villages. Our jobs stretch from Killin to Glasgow (42 miles away).
All of FK21 is covered. We regularly work on streets such as Main Street, Laggan Gardens and Ballechroisk Court. Neighbouring places we cover include Lochearnhead (6 miles south), St Fillans (9 miles south-east), Strathyre (10 miles south), Boreland (12 miles north-east) and Fearnan (12 miles north-east).
What’s near Killin
Locally, our jobs take us to homes close to Free Church Killin. A little further out are Finlarig Castle (0.6 miles north). Open spaces near Killin include Lochan Lairig Cheile.
Common problems we fix in Killin
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Customers usually contact us about:
- Enamel that is lost its shine and feels rough
- Chips and rust in more than one place
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
Questions to ask before you book
- What preparation is included
- How the colour is matched
- How to care for the finish
- Who turns up on the day
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
