Perth and Kinross · Scotland
Bath Re-enamelling for St Fillans homes
Problem with your bath in St Fillans? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
The process
Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for a full day. Before we go, we will explain when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the following day.
How to prepare
- Let the surface dry out before the visit
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
Read more
How we handle bath re-enamelling in St Fillans
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Common call-outs are for an outdated colour you’d like to change and a roll-top that’s seen better days, in Victorian roll-tops, basins & shower trays and cast iron baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- St Fillans (PH6)
- Region
- Perth and Kinross
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What else we do in St Fillans
FAQs for St Fillans
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
For landlords and businesses
If you manage property in St Fillans, we’ll quote for several properties at once. Send pictures for each one and we will come back with a combined price.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
St Fillans and the surrounding area
St Fillans is about 20 miles north of Stirling, in Perth and Kinross. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. We work in 107 places across Perth and Kinross, from the larger towns to small villages. Our nearest city page is Glasgow, about 38 miles away.
Our technicians cover all of the PH6 postcode area. You’ll find streets such as Dundurn Walk and Manse Lane, and we cover them all. Nearby, we also work in Comrie (5 miles east), Lochearnhead (7 miles west), Killin (9 miles north-west), Strathyre (10 miles south-west) and Callander (11 miles south).
Near you in St Fillans
We visit homes around Church Of The Holy Spirit, among other places. Open spaces near St Fillans include Creag Odhar and Loch Boltachan.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Dry the bath after use to stop limescale
- A dripping tap should be fixed promptly
- Use washing-up liquid and a soft cloth
- Don’t use the bath until it has fully cured
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
What a repair can’t fix
We will not take on work that will not last, so these are the limits:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- A metal bath with a through crack
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Common problems we fix in St Fillans
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is usually perfectly sound.
Look out for these signs:
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
- Brown or grey marks that do not clean off
- A peeling or bubbling previous coating
Questions to ask before you book
- What aftercare is recommended
- Whether there are any call-out or travel charges
- Who turns up on the day
- Whether cleaning and preparation are in the price
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Why repair rather than replace?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.
What you get with us
- No need to remove anything
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- A year’s guarantee on all work
Read our full price list or bath cost comparison.
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to St Fillans. The price comes down to:
- The colour and finish to match
- Whether old repairs or coatings need taking off
- The material and finish
- What kind of damage it is
Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
We price nearly every job from pictures. This is what we need:
- Daylight if possible, and no flash reflection
- The material, if you know it
- Where you are, by postcode
- A coin or ruler next to the damage for scale
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
