Redcar and Cleveland · England
Bath re-enamelling & resurfacing in Kilton, Redcar and Cleveland
Bath re-enamelling for Kilton, without a refit. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- Staining under the taps and around the waste
- Worn patches where water runs and sits
About our bath re-enamelling in Kilton
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Typical jobs include a coating lifting around the plughole and lots of chips and rust spots, on cast iron baths, basins & shower trays and Victorian roll-tops.
All our work comes with a one-year guarantee, wherever you are in Redcar and Cleveland.
- Location
- Kilton (TS12)
- County
- Redcar and Cleveland
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath re-enamelling in Kilton
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Are there extra charges for Kilton?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Do you come to Kilton?
Yes. We cover the entire UK and come to Kilton. Send photos and we will quote, or call 0345 017 0787.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Common problems we fix in Kilton
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Signs it’s time to call us include:
- Lots of chips and rust spots
- A bath in a colour that no longer suits
- Brown or grey marks that do not clean off
- A dull, rough surface that will not come clean
Questions to ask before booking
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
- What prep work is covered
- What happens if they find more damage
How to care for the repair
Once the work has cured, treat it gently:
- Leave the bath for the full curing time before using it
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Don’t leave bottles, razors or sponges standing on the surface
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
The process
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
Getting a price
Email us pictures of the damage and one of the entire item, and tell us you are in Kilton, and we’ll come back with a fixed quote.
Related advice
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- Access to the area
- The material and finish
Our prices are the same across the UK, so there’s no premium for Kilton. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed price
When you take your photos, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- A picture taken from further back
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Work for landlords and builders
For anyone letting property in or around Kilton, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
More services for Kilton
Repairing versus replacing in Kilton
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why Kilton clients choose us
- Most jobs done in one visit
- Free fixed quotes from pictures
- One-year guarantee on every repair
- Colours mixed by hand to suit your surface
Take a look at our prices page or guide to resurfacing and replacement costs.
Where we work around Kilton
Kilton is about 6 miles east of Guisborough, in Redcar and Cleveland. Jobs in Kilton are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We work in 48 places across Redcar and Cleveland. Our nearest city page is Newcastle upon Tyne, about 42 miles away.
We work across the TS12 postcode area and the streets around it. Other places close to Kilton include Carlin How (1 mile north-east), Liverton Mines (1 mile east), Kilton Thorpe (1 mile south-west), Skinningrove (1 mile north-east) and Brotton (1 mile north-west). Larger places within reach include Redcar (7 miles north-west), Guisborough (6 miles west), Eston (9 miles west), Marske-by-the-Sea (5 miles north-west), Grangetown (9 miles west) and Skelton-in-Cleveland (3 miles west).
What’s near Kilton
Around Kilton, we work in homes near St Hilda, Whitecliffe Academy and Freebrough Academy, among other places. For rail, the closest station is Saltburn station, about 3 miles north-west of the centre. Well-known places in the area include Kilton Castle (less than half a mile south). Green spaces nearby include Freebrough Hill.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
About our accreditations · Every repair comes with a one-year guarantee.
