Redcar and Cleveland · England
Bath re-enamelling & resurfacing in Liverton, Redcar and Cleveland
Our technicians come to Liverton for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- An old resurfacing that’s failing
When to call us in Liverton
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
If you can see any of these, send us a picture:
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
- A peeling or bubbling previous coating
- Thin, worn enamel in places
Questions to ask before booking
- How soon you can use it again
- What aftercare is recommended
- What happens if they find more damage
- A fixed quote, and whether VAT is included
About our bath re-enamelling in Liverton
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for a dull, rough surface that won’t come clean and worn patches where water runs and sits, on basins & shower trays, acrylic baths and pressed steel baths.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Liverton (TS13)
- Region
- Redcar and Cleveland
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Liverton and nearby
Liverton is about 6 miles east of Guisborough, in Redcar and Cleveland. Anywhere in TS13, we come to you. Liverton is one of 48 towns and villages in Redcar and Cleveland where we work. You can also see our page for Newcastle upon Tyne, about 43 miles away.
All of TS13 is covered. From Liverton Road and Moorsholm Lane or anywhere nearby, a technician can come to you. If you are just outside Liverton, we cover Liverton Mines (1 mile north), Kilton (2 miles north-west), Kilton Thorpe (2 miles north-west), Moorsholm (2 miles south-west) and Carlin How (2 miles north). Larger places within reach include Redcar (8 miles north-west), Guisborough (6 miles west), Eston (10 miles west), Marske-by-the-Sea (6 miles north-west), Grangetown (10 miles west) and Skelton-in-Cleveland (4 miles north-west).
Landmarks near Liverton
We visit homes around The Water Wheel Inn and Church of St Michael and the streets around them. For rail, the closest station is Saltburn station, about 4.5 miles north-west of the centre. Further afield, we also cover the area around Kilton Castle (1.2 miles north-west). The countryside around Liverton includes Freebrough Hill.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
How to look after the repair
Simple care helps the repair last. We recommend:
- Keep suction mats out of the bath
- Do not let dyes or oils sit on the finish
- Do not leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- One visit for most repairs
- Honest advice, even when it means no job
- A fixed quote before you book
- We come to you, anywhere in the UK
Read our full price list and bath cost comparison.
Liverton questions
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Redcar and Cleveland.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens after I send photos?
You get a fixed price and available dates. If we need another angle, we will ask.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. The old coating comes off before we resurface it. Mention it when you send photos.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Honest limits
Some jobs aren’t right for a repair, including:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that’s cracked right through
Send us pictures and we will tell you honestly before you book.
Materials we work on in Liverton
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Towns and villages near Liverton
Other services in Liverton
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a full day, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
- Let us know if it has been repaired before
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Read more
What affects the price in Liverton
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Previous DIY repairs that have to come out
- How much damage there is
- The material
- Unusual colours or finishes
We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Before you send photos, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- The material, if you know it
- Details of any past repairs
If you’re in Liverton and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
About our accreditations · Every repair comes with a one-year guarantee.
